← Brewology.com

Vita Store › Plugins

Wi-Fi Turbo Vita v0.7.2 by juanjsebgarcia

Released Nov 14, 2026 · Plugins
549 downloads here · Developer site

The PS Vita's Wi-Fi, fixed: faster, quicker to respond, and it reconnects by itself.
A taiHEN plugin (kernel + user module) for HENkaku/Ensō on firmware 3.60, 3.65 and 3.68. The Vita's Wi-Fi works, but Sony set it up for 2011:

It sleeps between packets. Power save is on by default, so the first packet after any pause waits for the radio to wake up: ~100 ms, often 200+. You feel that in game streaming and remote shells.
It uses half the channel. The radio handles 40 MHz channels, but the driver only ever asks for 20 MHz, which caps the link at 72 Mbps.
It gives up at boot. If the auto-join misses your network once, the Vita just sits there offline until you open Settings and tap Connect.
It gets dropped when idle. Many access points disconnect quiet clients after a few minutes, and the Vita doesn't always come back.
Wi-Fi Turbo fixes each of these, measured on real hardware.

Install on your Vita

FileSize
wifiturbo.suprx
9cafafd2…0385
51 KB Download
wifiturbo_kernel.skprx
5e03301f…30a1
29 KB Download
wifiturbo_qm.suprx
63a4c272…e871
11 KB Download
wifiturbo_settings.suprx
9aaf9945…99bf
51 KB Download

Plugins: this release has 4 plugin files. Copy the ones you need to ur0:tai/ (the developer's notes say which), then add a line for each to ur0:tai/config.txt, under its section:

Under *KERNEL:
ur0:tai/wifiturbo_kernel.skprx

Under *main for the home screen, *ALL for every game, or a game's title id for one game:
ur0:tai/wifiturbo.suprx
ur0:tai/wifiturbo_qm.suprx
ur0:tai/wifiturbo_settings.suprx

Then reboot the Vita. If your Vita has ux0:tai/config.txt, taiHEN reads that file instead. The developer's notes say if a plugin goes somewhere else.

To copy a file to ur0:tai/, use FTP in VitaShell, or copy it to ux0: over USB and move it in VitaShell (△ › Copy, open ur0:tai/, △ › Paste). Press ✕ on config.txt to edit it.

Autoplugin 2 installs many common plugins from a list on the Vita.

Homebrew needs HENkaku, h-encore, HENlo or Ensō. New to Vita homebrew? Start here.

All versions (12)

Screenshots

About Wi-Fi Turbo Vita

> Runs on every firmware from 3.60 to 3.74. 3.60, 3.65 and 3.68 are tested on a console; the others are not yet. The MAC address option is experimental and tested on 3.60.

Fixed since v0.7.1

  • No more battery drain with Wi-Fi off. Keep Wi-Fi on stops the Vita going to sleep by itself, so that Wi-Fi stays connected. It kept doing that after Wi-Fi had been switched off or airplane mode turned on, when there is nothing to keep connected: a Vita left alone like that never slept and ran its battery down. Now, with Wi-Fi off or airplane mode on, the Vita goes to sleep on its timer exactly as it does without Wi-Fi Turbo, and the idle keep-alive pauses too. Switch Wi-Fi back on and Keep Wi-Fi on takes over again. Thanks to u/ali_ihsan21 on Reddit for the report.

Also new

  • The log says when the Vita may sleep, and why. wifiturbo.log now gets a line each time Keep Wi-Fi on starts or stops holding off sleep, with the reason (on battery, charging, Wi-Fi off, power button pressed), so a battery report can show what was going on.

Everything else is unchanged from v0.7.1.

Install or update

  1. Download wifiturbo_kernel.skprx, wifiturbo.suprx and wifiturbo_settings.suprx below.
  2. Copy them to ur0:tai/, replacing the older copies. Using the quick menu toggles? Also replace wifiturbo_qm.suprx in your QuickMenuReborn folder.
  3. Updating from v0.7.0 or v0.7.1: nothing to change in config.txt, and your settings are kept. Updating from v0.6.2 or older: wifiturbo_settings.suprx is a new file since v0.7.0, so copy it too; see the v0.7.0 notes. New install: add the lines from the README to your config.txt.
  4. Reboot, then open Settings → Network → Wi-Fi Turbo.

If anything goes wrong, hold L while the Vita boots to skip all plugins.

Testers: please report

Open an issue with your firmware, how you run HENkaku (Ensō, h-encore, HENlo), what you noticed, and ur0:data/wifiturbo/wifiturbo.log and ur0:data/wifiturbo/wifiturbo_kernel.log. Redact your network name (SSID) and MAC addresses from the logs first.

Known limitations

  • MAC address has only run on 3.60. Sony rebuilt the Wi-Fi driver in 3.71; the parts it uses are the same there, but 3.71 to 3.74 is untested on a console. With Per network on, a console where the address can't be set won't connect to Wi-Fi: choose Default to get back online.
  • Changing the MAC address, the power profile or the receive buffer briefly drops the connection, which also ends any FTP transfer in progress.
  • With Keep Wi-Fi on and Wi-Fi on, a screen that has turned off on its timer is not sleep: press the power button once to sleep the Vita.
  • Only 3.60, 3.65 and 3.68 have run on a console so far. On the other versions a feature that can't find what it expects switches itself off and logs why, rather than risk a crash.

Checksums (SHA-256)

5e03301fab9a635159234afcf724cf252014ae084370bb1217c27f9527a730a1 wifiturbo_kernel.skprx
9cafafd210a2dafe6dfc519333ed5fcda2238146a7460bc926c9ad9446a10385 wifiturbo.suprx
9aaf9945591e6a1c7a1ac1afc3fb1483ee0966a206371953c8088200997199bf wifiturbo_settings.suprx
63a4c272cf3ba52f436d5921280cf76d3e6e8b98b2f5b6dd3494656dbf0ee871 wifiturbo_qm.suprx

Provided as is, with no warranty. See the README's disclaimer.

Release notes

v0.7.2 · wifiturbo.suprx · Nov 14, 2026

Runs on every firmware from 3.60 to 3.74. 3.60, 3.65 and 3.68 are tested on a console; the others are not yet. The MAC address option is experimental and tested on 3.60.

Fixed since v0.7.1

  • No more battery drain with Wi-Fi off. Keep Wi-Fi on stops the Vita going to sleep by itself, so that Wi-Fi stays connected. It kept doing that after Wi-Fi had been switched off or airplane mode turned on, when there is nothing to keep connected: a Vita left alone like that never slept and ran its battery down. Now, with Wi-Fi off or airplane mode on, the Vita goes to sleep on its timer exactly as it does without Wi-Fi Turbo, and the idle keep-alive pauses too. Switch Wi-Fi back on and Keep Wi-Fi on takes over again. Thanks to u/ali_ihsan21 on Reddit for the report.

Also new

  • The log says when the Vita may sleep, and why. wifiturbo.log now gets a line each time Keep Wi-Fi on starts or stops holding off sleep, with the reason (on battery, charging, Wi-Fi off, power button pressed), so a battery report can show what was going on.

Everything else is unchanged from v0.7.1.

Install or update

  1. Download wifiturbo_kernel.skprx, wifiturbo.suprx and wifiturbo_settings.suprx below.
  2. Copy them to ur0:tai/, replacing the older copies. Using the quick menu toggles? Also replace wifiturbo_qm.suprx in your QuickMenuReborn folder.
  3. Updating from v0.7.0 or v0.7.1: nothing to change in config.txt, and your settings are kept. Updating from v0.6.2 or older: wifiturbo_settings.suprx is a new file since v0.7.0, so copy it too; see the v0.7.0 notes. New install: add the lines from the README to your config.txt.
  4. Reboot, then open Settings → Network → Wi-Fi Turbo.

If anything goes wrong, hold L while the Vita boots to skip all plugins.

Testers: please report

Open an issue with your firmware, how you run HENkaku (Ensō, h-encore, HENlo), what you noticed, and ur0:data/wifiturbo/wifiturbo.log and ur0:data/wifiturbo/wifiturbo_kernel.log. Redact your network name (SSID) and MAC addresses from the logs first.

Known limitations

  • MAC address has only run on 3.60. Sony rebuilt the Wi-Fi driver in 3.71; the parts it uses are the same there, but 3.71 to 3.74 is untested on a console. With Per network on, a console where the address can't be set won't connect to Wi-Fi: choose Default to get back online.
  • Changing the MAC address, the power profile or the receive buffer briefly drops the connection, which also ends any FTP transfer in progress.
  • With Keep Wi-Fi on and Wi-Fi on, a screen that has turned off on its timer is not sleep: press the power button once to sleep the Vita.
  • Only 3.60, 3.65 and 3.68 have run on a console so far. On the other versions a feature that can't find what it expects switches itself off and logs why, rather than risk a crash.

Checksums (SHA-256)

5e03301fab9a635159234afcf724cf252014ae084370bb1217c27f9527a730a1 wifiturbo_kernel.skprx
9cafafd210a2dafe6dfc519333ed5fcda2238146a7460bc926c9ad9446a10385 wifiturbo.suprx
9aaf9945591e6a1c7a1ac1afc3fb1483ee0966a206371953c8088200997199bf wifiturbo_settings.suprx
63a4c272cf3ba52f436d5921280cf76d3e6e8b98b2f5b6dd3494656dbf0ee871 wifiturbo_qm.suprx

Provided as is, with no warranty. See the README's disclaimer.

Full changelog

Something wrong with this listing? Report a problem · Are you the developer? Claim this listing