HENlo, then Ensō on 3.65 with VitaDeploy (from firmware 3.74)
The community guide's route: HENlo in the Vita's browser on 3.74, then VitaDeploy's Quick 3.65 Install moves the Vita to 3.65 and installs Ensō, which keeps it hacked through every restart.
Before you start
- Ensō is permanent, and a wrong step can brick the Vita beyond repair. Follow every step exactly.
- A second-hand Vita: the guide starts with Settings, Format, Restore This System (it erases the console), then the update to 3.74.
- A Vita that left the factory with firmware above 3.65 cannot be downgraded (modoru's README), so it cannot get Ensō: keep using HENlo, run again after each restart. When the downgrade refuses, VitaDeploy has already replaced the plugin setup (the old one is kept in
ur0:tai_old): ask the community before you try anything else. - If this Vita had plugins installed, turn them off first: the HENlo menu's "Reset taihen config.txt" resets the list.
- Keep it on the charger with the battery above 50 percent, and do not let it sleep during the install.
- If the Vita asks to transfer data from the internal memory card to the removable one, answer No: Yes deletes the card's data.
- Do not install Enso EX or other "advanced" tools: the guide warns they can brick.
Steps
- Not on 3.74 yet: Settings, System Update, Update Using Wi-Fi. Before you accept, check the offer says Version 3.74 (if not, clear your Wi-Fi DNS settings and try again).
- In the Vita's browser, open HENlo. Press "Unlock my Vita", then "Unlock". If it fails: make sure JavaScript is on, delete cookies and history, restart the Vita and try again.
- In the HENlo menu choose "Install henkaku", then "Install VitaDeploy", then exit.
- Settings, HENkaku Settings: turn on "Enable Unsafe Homebrew".
- Open VitaDeploy: "Install a different OS", then "Quick 3.65 Install" (it needs Wi-Fi). Wait for the downloads, press ✕, read the notice, wait 20 seconds, press ✕ again (R cancels). Leave the Vita awake and charging until it finishes and restarts; if it sleeps and sticks on a black screen, hold Power until it turns off and redo this step.
- Finish as the guide does (finalizing setup): in VitaDeploy's App downloader get the iTLS Installer, run it and choose "Install the full iTLS package"; block updates (Settings, System, Auto-Start Settings, untick "Download Update File for System Software"); and in HENkaku Settings turn on PSN spoofing and version spoofing, set to 3.74.
Files
| File, and how to check it | From | |
|---|---|---|
| HENlo |
psp2.dev (SKGleba) | Open |
| VitaDeploy |
GitHub (SKGleba) | Get it |
iTLS-Enso 3.2.1 8853cf3d685e6eabac0ca4c6d9e81f0dff3636c4805ba2a79de487cbd05ccf9b |
GitHub (SKGleba) release page |
Get it |
Then
- VitaShell 2.02: the file manager and installer almost everything else needs.
- Adrenaline: PSP games and homebrew on the Vita.
- VitaDB Downloader .2.8: installs Vita homebrew from VitaDB.
- Autoplugin 2 2.19: installs plugins.
- Storage: the Quick 3.65 Install already set up yamt-vita 4.0 for an SD card (SD2Vita). For PSVita-StorageMgr 3.2 instead (a PS TV's USB drive, for one), back up ux0: and delete
yamt.cfg,yamt.skprx,yamt.suprxandyamt_helper.skprxfromur0:taifirst: never two storage plugins at once.
