← Brewology.com

Vita Store › Plugins › vitastream

vitastream changelog

v2.3 · Nov 4, 2026

VitaStream v2.3 fixes PS1 audio crackling and USB audio capture stopping after launching Everybody's Golf. Local speaker playback and USB capture continue to use the same final digital mix.

Fixes

  • Keep SrcMix0 forwarding active for Adrenaline's PS1 VOICE-port audio. The previous SrcMix0/SrcMix1 mode mismatch could stop forwarding while PS1 audio was still queued, producing gaps in both USB audio and local playback. Verified with Crash Bandicoot 2.
  • Preserve capture through SceAVConfig's default routing refreshes, including the AudioIn-activity update triggered by Everybody's Golf. Other routing policy work continues; bounded recovery remains available for unguarded resets.
  • Restore each path's latest accepted mode request when capture stops, falling back to its pre-capture mode when no newer request was observed. Explicit new owners take precedence, including a new owner requesting mode 2 when the hardware is already in mode 2.
  • Serialize routing requests, monitor reads, drains and cleanup so an old capture cannot overwrite a newer route or submit reads/drains into its reader. Capture memory is retained when DMA ownership cannot be safely fenced.

The fix adds no software mixing, resampling, gain adjustment or capture buffers. It reuses Sony's existing forwarding/capture DMA and the existing local playback path. The source changes and firmware findings are documented in the PS1 report and Everybody's Golf report.

Installation

Replace the existing plugin with vitastream.skprx at its current taiHEN path and reboot, keeping only one USB streaming plugin loaded. The normal entry is ur0:tai/vitastream.skprx. The routing hook remains resident after activation, so replacing or removing the loaded plugin requires a reboot.

Existing ur0:/tai/vitastream.cfg settings are preserved. A missing configuration is created automatically with:

screen=on
speakers=on

Use screen=off and/or speakers=off to disable the corresponding local output during capture, then reboot after editing. USB capture remains available. There are no separate OLED-off or LCD-off binaries.

Downloads

| File | Purpose |
| --- | --- |
| vitastream.skprx | Normal plugin; recommended. |
| vitastream_diagnostic.skprx | Troubleshooting plugin; writes ux0:/data/vitastream_diag.txt. Install it instead of the normal plugin. |
| vitastream.cfg | Optional sample configuration. |
| SHA256SUMS | Checksums for the plugin, configuration and metadata assets. |
| build-info.json | Exact commit, pinned SDK, build flags, artifact hashes and validation details. |
| firmware-compatibility.json | Offline profile/import validation for both plugins. |

Validation

Built from signed commit `65621f2` using the pinned VitaSDK image in build-info.json.

  • Full host suite passes with AddressSanitizer and UndefinedBehaviorSanitizer from a clean archive of that commit. Focused ThreadSanitizer tests cover concurrent routing and cleanup, both ownership paths, failed requests, same-mode takeovers and reader/drain isolation.
  • Normal and diagnostic runtime ELF files are byte-for-byte identical to the retail-tested candidate. Repacking those tested ELFs with the v2.3 module metadata reproduces both release SKPRX files exactly. Both modules report version 2.3.
  • Retail OLED firmware 3.60 checks covered Everybody's Golf launch/exit, LiveArea audio, Crash Bandicoot 2, and capture stop/restart. Comparison recordings changed from 79 periodic gaps to zero; the final candidate's PS1 recordings also had zero periodic gaps. Local playback and PC capture were confirmed clear. Configuration files were unchanged and no new coredumps were found.
  • Offline validation passes for 31 external firmware/hardware combinations and 10 additional tool images. Missing external images remain testkit 3.69/3.71/3.74 and devkit 3.72/3.74. These checks do not substitute for physical testing on every firmware/model.

Remaining limits

Bluetooth/HDMI handoff, headphone routing, LCD-specific behavior, other physical firmware/model combinations and long-term A/V sync remain unverified. The Camera crash and runtime quick-menu toggle are not addressed by this release. Later USB suspend/storage, Real Racing 3 and EQVita reports are separate from the fixed missing-audio regression and are not claimed resolved here.

Based on vita-udcd-uvc, originally created by Xerpi (Sergi Granell).

v2.2 · Nov 3, 2026

VitaStream v2.2 creates its configuration automatically and uses the same configurable plugin for OLED and LCD systems.

Changes

  • Automatically create ur0:/tai/vitastream.cfg on startup when it is missing, with both outputs enabled:
screen=on
speakers=on
  • Enable the screen and local speaker/headphone playback by default. Missing keys, an invalid/unreadable configuration, or a failed file creation use these enabled defaults.
  • Preserve existing configuration files and their explicit settings. Exclusive creation prevents overwriting a file created concurrently; partial writes and I/O failures are handled.
  • Retire the separate OLED-off and LCD-off binaries and build flags. Set screen=off in the configuration to disable either panel during USB capture. USB video and audio continue streaming.
  • Update both plugin modules to version 2.2.

Installation and configuration

Replace the existing plugin with vitastream.skprx, keep one USB streaming plugin in taiHEN's *KERNEL section, and reboot. The normal entry is ur0:tai/vitastream.skprx. A missing configuration is created automatically; downloading or copying the sample file is optional.

Existing configuration files are kept, including any explicit off settings. To change behavior, edit ur0:/tai/vitastream.cfg and reboot. speakers=off silences local playback during USB audio capture, while screen=off disables the local panel during capture. Use on to keep the corresponding local output enabled.

Downloads

| File | Purpose |
| --- | --- |
| vitastream.skprx | Normal plugin; recommended. |
| vitastream_diagnostic.skprx | Troubleshooting plugin; writes ux0:/data/vitastream_diag.txt. |
| vitastream.cfg | Optional sample configuration. |
| SHA256SUMS | Checksums for plugin, configuration and metadata assets. |
| build-info.json | Exact commit, pinned SDK, build flags, artifact hashes and validation details. |
| firmware-compatibility.json | Offline firmware/profile/import validation for both plugins. |

The normal and diagnostic plugins both support OLED/LCD screen control through the configuration file. Install one at a time. Keep a previous plugin for rollback; holding L during boot skips plugin loading if recovery is needed.

Validation and limits

Built from signed commit `f207bb7` using the pinned VitaSDK image recorded in build-info.json.

  • The complete host suite passes with AddressSanitizer and UndefinedBehaviorSanitizer from a clean archive of that commit. Configuration regressions cover automatic creation, preserved settings, concurrent creation, partial writes and I/O failures. Both OLED and LCD policy tests pass.
  • Both packed modules report version 2.2. Repacking the verified module metadata reproduces the published plugin bytes.
  • Offline checks pass against 31 external firmware/hardware combinations and 10 additional tool images, including linked kernel imports and runtime-resolved audio/panel exports. Missing external images remain testkit 3.69, 3.71, 3.74; devkit 3.72, 3.74.

The audio and screen features were previously validated on a retail OLED Vita running firmware 3.60, including simultaneous USB audio/local speaker playback and OLED restoration. No new physical-console test was performed for v2.2's automatic file creation. LCD panels, headphone routing, other firmware and long-term A/V sync still need physical testing. A prior immediate audio stop/reopen attempt required a host retry; application-specific Camera and Madden reports are not claimed resolved by this release.

See the configuration documentation and earlier retail validation.

Based on vita-udcd-uvc, originally created by Xerpi (Sergi Granell).

v2.1 · Nov 3, 2026

VitaStream v2.1 restores full-mix USB audio and adds optional playback through the Vita's own speakers while recording.

Changes

  • Restore SceAudio's firmware-owned MAIN monitor, the full-mix capture path used in 1.9, to address sounds missing from 2.0's secondary-output capture.
  • Add speakers=on/off to forward captured PCM to the local output through a separate DMA operation. Forwarding uses a private 4 KiB buffer and approximately 192 kB/s of copying, with no software mixing or resampling.
  • Add screen=on/off for the local display during USB capture. Restore the saved OLED brightness when capture stops; the OLED power-on/brightness queue handling is corrected.
  • Retain source framebuffer memory through conversion, validate source formats and physical mappings, fence transfers before freeing buffers, and recover streaming after USB storage returns control to MTP.
  • Package the bounded single-buffer video configuration tested on retail hardware (VIDEO_KERNEL_POOL=1). It keeps video allocation outside the application's PhyCont pool, with conversion/transmission overlap disabled.

Installation and settings

  1. Download vitastream.skprx, replace the existing VitaStream plugin, and keep only one USB streaming plugin enabled in taiHEN's *KERNEL section. The normal entry is ur0:tai/vitastream.skprx.
  2. Copy the supplied vitastream.cfg to ur0:/tai/vitastream.cfg to enable both the local screen and local speaker playback:
screen=on
speakers=on
  1. Reboot. Reboot again after editing the settings. Set either option to off to disable that local output during capture; USB recording continues.

Without a valid configuration file, the normal build defaults to screen on and local playback off during USB audio capture. The supplied configuration explicitly enables both.

Downloads

| File | Purpose |
| --- | --- |
| vitastream.skprx | Normal plugin; recommended. |
| vitastream.cfg | Sample settings enabling the screen and local playback. |
| vitastream_diagnostic.skprx | Troubleshooting variant; writes ux0:/data/vitastream_diag.txt. |
| vitastream_oled_off.skprx | Compatibility variant defaulting to screen off without a configuration override. |
| vitastream_lcd_off.skprx | Compatibility variant defaulting to screen off without a configuration override. |
| SHA256SUMS | Checksums for all plugin, configuration and metadata assets. |
| build-info.json | Exact commit, pinned SDK, build flags, hashes and validation details. |
| firmware-compatibility.json | Offline firmware/profile/import validation for all four variants. |

Install one plugin variant at a time. The normal plugin supports screen=off on OLED and LCD panels, so a separate display-off build is optional. Keep the previous plugin for rollback; holding L during boot skips plugin loading if recovery is needed.

Validation and remaining limits

  • Host tests pass with AddressSanitizer and UndefinedBehaviorSanitizer from a clean archive of release commit `c7fc7a1`. All four packed modules report version 2.1.
  • Retail OLED Vita on firmware 3.60: simultaneous USB audio and local speaker playback confirmed; screen/audio off controls confirmed; screen restoration confirmed. Final capture contained updating 960×544 video and nonzero 48 kHz stereo audio without host audio callback gaps. No new coredumps were found. The normal and diagnostic ARM ELF files exactly match the tested candidate; release packaging changes the module version to 2.1.
  • Offline checks pass for 31 external firmware/hardware combinations and 10 additional tool images, including linked imports and runtime-resolved audio/panel exports. Missing external images remain testkit 3.69, 3.71, 3.74; devkit 3.72, 3.74. Offline checks do not establish runtime behavior on those devices.
  • LCD panels, headphones, other firmware and long-term A/V synchronization still need physical testing. One immediate audio stop/reopen attempt returned 0x80027101; a subsequent host retry succeeded. Application-specific Camera and Madden reports are not claimed resolved by the retail check.

See the configuration documentation and retail validation report for details.

Based on vita-udcd-uvc, originally created by Xerpi (Sergi Granell). Buffered video overlap in the source is adapted from trap15's original change.

v2.0 · Oct 11, 2026

vitastream 2.0 is the first release under the vitastream name. It is based on vita-udcd-uvc, originally created by Xerpi (Sergi Granell).

Changes

  • Rename the plugin, USB device identity, module, diagnostic/log files, and documentation to vitastream.
  • Merge independent SourceMixer1 secondary-output audio capture with the existing buffered video pipeline. The implementation leaves the normal output route active during USB capture. Audio remains 48 kHz stereo signed 16-bit PCM.
  • Add explicit loaded-module identity checks for firmware families 3.60, 3.61, 3.63, 3.65, 3.67, 3.68, 3.69, 3.70, 3.71, 3.72, 3.73, and 3.74, plus the internal 3.650.000 identities. The checks apply to retail, testkit and devkit modules independently of the reported system version.
  • Validate the selected normal I2S output against the firmware's physical FIFO table, replacing the fixed I2S7 requirement. Keep the monitor-mode, unmapped-output and busy-channel guards.
  • Check module identities, segment extents, USB serializer context and DMA callback/interrupt context before installing hooks or allowing DMA. Abort unknown/mismatched revisions and clean up the hook after startup resource failures.

All five video modes remain available, including 1280x720. Video remains uncompressed NV12 using IFTU conversion and USB DMA.

Downloads

| File | Use |
| --- | --- |
| vitastream.skprx | Normal build; leaves the Vita display on. |
| vitastream_oled_off.skprx | Turns off the OLED display while streaming. |
| vitastream_lcd_off.skprx | Turns off the LCD display while streaming. |
| SHA256SUMS | SHA-256 checksums for the plugin files and metadata. |
| build-info.json | Exact source commit, pinned build image, build options and artifact hashes. |
| firmware-compatibility.json | Firmware/module/import validation results for these release builds. |

Install one plugin variant. The display-off variants are for the corresponding display type.

Installation

  1. Copy the selected plugin to ur0:tai/.
  2. Replace the previous udcd_uvc.skprx entry in the *KERNEL section of ur0:tai/config.txt with the selected filename. For the normal build:
*KERNEL
ur0:tai/vitastream.skprx
  1. Keep only one USB streaming plugin entry enabled, then reboot the Vita.
  2. Select vitastream as the video/audio device on the computer. On macOS, use FFmpeg 8.1.3 or later.

Keep the previous plugin file for rollback. Holding L during boot skips plugin loading if recovery is needed.

Validation and limits

The release is built from commit `d7836db` using a pinned VitaSDK image. The host transport, pacing, shutdown, compatibility, output-route and startup tests pass with AddressSanitizer and UndefinedBehaviorSanitizer. All three attached production variants were rebuilt from a clean Git snapshot; their module names, module version 2.0, USB strings and source hashes were checked.

Offline checks passed against 31 external firmware/hardware combinations and 10 additional internal/tool images, including every linked Sony kernel import for each attached variant. Five external combinations remain unverified because their images were unavailable: testkit 3.69, 3.71 and 3.74; devkit 3.72 and 3.74. The internal devkit 3.72 debugger image was checked separately and does not substitute for its missing external image.

No new physical-console test was performed for this release. Earlier hardware performance reports predate the merged audio implementation and do not establish runtime behavior of these binaries. Audio routed through a different mixer or an active firmware monitor is outside the supported normal SourceMixer1 path.

The complete compatibility report documents the checks and remaining coverage limits. The conversion/transmission overlap is adapted from trap15's original change.