← Brewology.com

Vita Store › Emulators

Uae4All2 Vita_mod v2.12 by rsn8887

Released Mar 23, 2024 · Emulators
128,110 downloads here · Developer site

Use4All2 Mod is an Amiga emulator for Vita. This is my mod of the latest Vita version of this great Amiga emulator that was ported by Cpasjuste. Depending on when you read this, this mod might be ahead or behind his version.

Install on your Vita

In VitaShell, hold Left on the D-pad and press ○ to open the QR code scanner, then point the Vita's back camera at the code.

FileSize
uae4all_2.10.vpk
cc4df197…c005 · installs as UAE4ALL00
4.1 MB Download
QR code of the download link for uae4all_2.10_brewology_com.vpk Scan it with VitaShell. It downloads uae4all_2.10.vpk and asks to install it.

Homebrew needs HENkaku, h-encore, HENlo or Ensō. New to Vita homebrew? Start here.

All versions (83)

Other ways to install

Copy it to the memory card: copy uae4all_2.10_brewology_com.vpk to ux0: (USB or FTP in VitaShell), open it in VitaShell and press ✕ to install it.

Screenshots

About Uae4All2 Vita_mod

Important note to Switch users
======
On the Switch, since v1.84, please use Application mode, not Applet mode, to start uae4all2, otherwise the config save as and savestate export options will not work. You can do this by holding down R while launching any game to make hbmenu appear in Application mode. In other words: launch uae4all2 via game, NOT via Album.

Recent Changes
======
2.12 (Switch only)

  • fix regression causing stuttery audio after suspend by linking with fixed SDL2

2.11 (Switch only)

  • fix touch input on Switch

2.10

  • allow autostarting of config file via command line argument. On Switch, the same forwarder that works with RetroArch can be used. On Vita, a custom bubble builder is provided. It uses the same method as DaedalusX.

Description
=====
Use4All2 Mod is an Amiga emulator for Vita and Switch. This is my mod of this great Amiga emulator that was originally ported to the Vita by Cpasjuste. Depending on when you read this, this mod might be ahead or behind his version.

Screenshot of UAE4All2 running on Switch

Photo of UAE4All2 running on Switch in tabletop mode

More Screenshots:

<a href="https://postimg.cc/SJFvR4ZD" target="_blank"><img src="https://i.postimg.cc/SJFvR4ZD/3.jpg" alt="3"/></a> <a href="https://postimg.cc/jLHkJ1mK" target="_blank"><img src="https://i.postimg.cc/jLHkJ1mK/4.jpg" alt="4"/></a> <a href="https://postimg.cc/cvdk7mG3" target="_blank"><img src="https://i.postimg.cc/cvdk7mG3/5.jpg" alt="5"/></a> <a href="https://postimg.cc/9zqkc0BD" target="_blank"><img src="https://i.postimg.cc/9zqkc0BD/6.jpg" alt="6"/></a> <a href="https://postimg.cc/2Lv9G95Q" target="_blank"><img src="https://i.postimg.cc/2Lv9G95Q/7.jpg" alt="7"/></a> <a href="https://postimg.cc/G9YXZNcY" target="_blank"><img src="https://i.postimg.cc/G9YXZNcY/8.jpg" alt="8"/></a> <a href="https://postimg.cc/PPQ2qwv5" target="_blank"><img src="https://i.postimg.cc/PPQ2qwv5/9.png" alt="9"/></a> <a href="https://postimg.cc/w1Ffwm9G" target="_blank"><img src="https://i.postimg.cc/w1Ffwm9G/10.jpg" alt="10"/></a> <a href="https://postimg.cc/1gjWQ1n0" target="_blank"><img src="https://i.postimg.cc/1gjWQ1n0/11.jpg" alt="11"/></a> <a href="https://postimg.cc/MMf9Z3VC" target="_blank"><img src="https://i.postimg.cc/MMf9Z3VC/12.jpg" alt="12"/></a> <a href="https://postimg.cc/qtRmSvRM" target="_blank"><img src="https://i.postimg.cc/qtRmSvRM/13.jpg" alt="13"/></a> <a href="https://postimg.cc/vxR347vc" target="_blank"><img src="https://i.postimg.cc/vxR347vc/14.jpg" alt="14"/></a> <a href="https://postimg.cc/WqMSgD9S" target="_blank"><img src="https://i.postimg.cc/WqMSgD9S/15.jpg" alt="15"/></a> <a href="https://postimg.cc/7fkKDV6R" target="_blank"><img src="https://i.postimg.cc/7fkKDV6R/16.jpg" alt="16"/></a>

Thanks to Cpasjuste for the original port, for jumping in and adding shader support, for making the assembler optimizations work, and for fixing audio playback on suspend/resume in SDL2 for Switch.

Thanks to ScHlAuChi for extensive testing, ideas, and for contributing the new larger virtual keyboard images.

Thanks to wronghands for the new, better-looking menu font, all the new keyboard styles, and many ideas.

Thanks to CrashMidnick for the French virtual keyboard.

Thanks to the original authors Chui, john4p, TomB, notaz, Bernd Schneider, Toni Wilen, Pickle, smoku, AnotherGuest, Anonymous engineer, finkel, Lubomyr, pelya and many more.

Thanks to my Patreon supporters: Jesse Harlin, Mored4u, RadicalR.

Installation
======

  • Vita:
  • Install .vpk
  • Obtain and copy BIOS files kick13.rom (Amiga 500), and kick31.rom (Amiga 1200) to ux0:/data/uae4all/kickstarts.
  • Optional: copy over additional BIOS files kick12.rom, kick20.rom, kickcustom.rom (for e.g. version 3.1.4 or any other user-supplied BIOS) to the same folder.
  • Switch:
  • Download and unzip uae4all2_switch.zip
  • Copy the resulting folder uae4all2 to /switch/ onto your SDCard, ensure none of the "archive" flags is set.
  • You should now have the executable /switch/uae4all2/uae4all2.nro and a folder /switch/uae4all2/data/ with the keyboard icons and other data files on your SDCard.
  • Obtain and copy BIOS files kick13.rom (Amiga 500), and kick31.rom (Amiga 1200) to your SDCard into /switch/uae4all2/kickstarts/.
  • Optional: copy over additional BIOS files kick12.rom, kick20.rom, kickcustom.rom (for e.g. version 3.1.4 or any other user-supplied BIOS) to the same folder.
  • Use nsp injection to start uae4all2, otherwise the config save as and savestate export options will not work. On SX OS, you can do this by holding down R while launching any installed game to make hbmenu appear.
  • MD5 of verified working kickstart rom files, you can test yours at onlinemd5:
kick12.rom (256 kB): (MD5) 85AD74194E87C08904327DE1A9443B7A
kick13.rom (256 kB): (MD5) 82A21C1890CAE844B3DF741F2762D48D
kick20.rom (512 kB): (MD5) FA4ACC75B49E880679FE02716AF24D71
kick31.rom (512 kB): (MD5) 646773759326FBAC3B2311FD8C8793EE

Other files might work, too.

  • You can purchase legal bios roms from Amiga Forever. They work. But since they are encrypted, you have to copy over your .key file along with the roms.

Vita/Switch-exclusive Features
======

  • Full speed emulation of most Amiga games with zero frameskip
  • Large, complete virtual keyboard with adjustable position and adjustable transparency
  • Six fully mappable custom control sets: map Vita/Switch buttons to any Amiga joystick or key input
  • Multiple hard-file support: up to 4 hdf files (size <2GB each on Vita, size <4GB each on Switch) can be mounted simultaneously
  • Multiple controller support on Vita TV/Switch: up to four (eight on Switch) paired controllers can be fully mapped
  • Analog mouse control: control the mouse using the analog stick with adjustable sensitivity
  • Shader support: default "sharp_bilinear_simple" uses integer pre-scale for sharp, undistorted pixels with minimum blur, even if game is zoomed to fill the full screen
  • Custom autofire: any mapped Vita/Switch button can have autofire with adjustable rate
  • Savestate with hard-file support: state can be saved even when hard-files are used
  • Additional emulator settings: sprite-sprite collisions can be enabled, blitter settings can be changed
  • Adjustable stereo separation
  • A button can be mapped to "slow mouse" in custom controls. When custom controls are on and that button is held down, the mouse pointer speed is greatly reduced. This is useful for precisely positioning the cursor.
  • Sticky virtual keyboard modifiers: allows keyboard combos like CTRL-C to be entered easily
  • Touchpad style pointer controls using the touchscreen
  • Parallel port joystick adapter support for multiplayer games with up to 4 joysticks.
  • Additional savestate slot called auto, for automatic savestate loading
  • Physical keyboard and mouse support (Bluetooth on Vita, USB on Switch)
  • Supports loading files from ux0: or uma0: partition (Vita only)
  • Rear touch panel can be enabled for mouse pointer control (Vita only)
  • Split Joy-Con support (Switch only)
  • A "fast mouse" custom button can be mapped to speed up the mouse
  • Automatic full 1080p support in docked mode (Switch only)
  • Savestate import/export to backup savestates
  • Config file management (load, save as, etc.)
  • Thumbnail previews for savestates
  • Four different on-screen keyboard styles: original, warm, cool, and dark
  • On-screen keyboard keys can be pressed via touch input in addition to dpad navigation

Controls
=====

General

(For Switch: Cross = B, Square = Y, Triangle = X, Circle = A, Select = Minus, Start = Plus)

Select = Toggle menu
Start = Toggle virtual keyboard
R+Start+Dpad up/down = Move screen up/down
R+Start+Dpad left/right = Change screenmode (to zoom in on games with borders)
Right analog stick = Analog mouse (can switch this to left stick in menu)

When custom controls are off

Up to four controllers are automatically mapped to players 1-4. Players 3 and 4 are on the emulated parallel port 4 player adapter.

Left analog stick = Amiga joystick directions
Dpad = Amiga joystick directions
L shoulder button = right mouse click (player 1 only)
R shoulder button = left mouse click (player 1 only)
(Shown below are control presets 1 (default) / 2 / 3 / 4)
Square = Autofire (default) / Fire / Autofire / Fire
Cross = Fire (default) / Autofire / Up (Jump) / Up (Jump)
Triangle = Space (default) / Space / Fire / Autofire
Circle = Secondary Fire (used only in a few games)
R+Square = Ctrl
R+Circle = Left Alt
R+Cross = Help
L+Square = Left mouse
L+Circle = Right mouse
R+Dpad = Arrow keys

When custom controls are on

L+Start = Toggle between custom control set number 1, 2, 3, 4 and 5

In this mode, Vita buttons can be mapped to any Amiga side keyboard key or joystick action. There's also a mapping option called "slow mouse." It will slow down the mouse pointer by a factor ten if that mapped button is held down. Up to four controllers can be mapped (for multiplayer on VitaTV and Switch). Four Amiga-side joysticks are supported. Joystick 3 and 4 are on the emulated parallel port joystick adapter.

Virtual keyboard controls

Start = Toggle virtual keyboard
Right analog stick up/down = Move virtual keyboard up and down
Right analog stick left/right = Change virtual keyboard transparency
Cross = Press selected key (on Switch, this can be changed from B to A)
Square = Backspace
Triangle = Toggle shift
Circle = Turn off all sticky keys (ctrl, alt, amiga, and shift) (on Switch, this can be changed from A to B)

Touch controls

Note: for multi-touch gestures, the fingers have to be far enough apart from each other, so that the Vita will not erroneously recognize them as a single finger. Otherwise the pointer will jump around.

Single short tap = left mouse click
Single short tap while holding a second finger down = right mouse click
Single finger drag = move the mouse pointer, how far the pointer moves in response to finger motion depends on the Mouse Speed setting
Dual finger drag = drag'n'drop (left mouse button is held down)
Three finger drag = drag'n'drop (right mouse button is held down)

Switch controls

The default OK button in menu and on-screen keyboard is B. This can be changed to A in "more options."

ZR button = slow-mouse (if custom controls are off)
ZL button = fast-mouse (if custom controls are off)

Split Joycon Mode: Split Joycon mode can be enabled/disabled in "more options." Upto four single Joycons are supported. Buttons can still be remapped. SL for player 1 is hardcoded to bring up the keyboard.

Split Joycon Controls:
Minus/Plus = Menu (player 1 only)
SL = on-screen keyboard (player 1 only)
Pressing stick while moving it = change keyboard transparency/position, control mouse pointer (player 1 only)
SR + SL + Stick directions = hotkey to quick-zoom image and center image vertically (player 1 only)

Physical Keyboard / Mouse controls

On Vita (Bluetooth): Mouse + keyboard tested working with the "Jelly Comb Mini Bluetooth Keyboard With Mouse Touchpad, ASIN:B06Y56BBYP," and with the "Jelly Comb Bluetooth Wireless Mouse ASIN:B075HBDWCF." The Amiga keys are mapped to Windows (GUI) keys as well as Page Up/Down. The Vita doesn't pair with all Bluetooth keyboards and mice. As a rule, if the keyboard works to highlight bubbles with cursor keys, it should also work in UAE4All.

On Switch (USB): All keyboards seem to work. Not all mice seem to work. Mouse compatibility sheet

Custom Bubble / Forwarder
======
To autostart a game config via a custom bubble (Vita) or forwarder (Switch), I used the following steps with the example game Superfrog:

Switch:

  • I started the emulator normally
  • I inserted Superfrog disk 1
  • I saved a config with name "superfrog" using the Config - Save As option in UAE4All2
  • I checked that the config was saved to my SD card with the full name /switch/uae4all2/conf/superfrog.conf
  • I then made myself a forwarder with a Superfrog Icon, using the online forwarder tool that also works for RetroArch, with the following options
  • Core: /switch/uae4all2/uae4all2.nro
  • Rom: /switch/uae4all2/conf/superfrog.conf
  • When I started the forwarder, Superfrog automatically launched.

Vita:

  • I started the emulator normally
  • I inserted Superfrog disk 1
  • I saved a config with name "superfrog" using the Config - Save As option in UAE4All2
  • I checked that the config was saved to my SD card with the full name ux0:/data/uae4all/conf/superfrog.conf
  • I then used the provided build.bat file on Windows (unzip the provided file builder.zip) with the following options
  • Bubble Name: Superfrog
  • Conf Name: ux0:/data/uae4all/conf/superfrog.conf
  • TitleID: SUPERFROG
  • When I started the custom bubble, Superfrog automatically launched

Notes
======

  • Bios: Please put kickstart files in ux0:/data/uae4all/kickstarts on Vita and in /switch/uae4all2/kickstarts directory on Switch. Files must be named as kick13.rom (for Amiga 500), and kick31.rom (for Amiga 1200). Optionally, kick12.rom, kick20.rom, and kickcustom.rom (any user supplied file, e.g. version 3.1.4 or anything else), can also be supplied.
  • Speed: Most games run full speed. Some slow Amiga 1200 and WHDLoad games actually run faster if the CPU speed is reduced from 14 MHz to 7 MHz, because they rely more on custom chips than CPU. Some graphics glitches in Lionheart WHDLoad inside the caves are fixed by this.
  • Config File: If you have problems with settings not saving etc, please delete or rename your config file in the folder ux0:/data/uae4all (Vita) or /switch/uae4all2/conf/ and restart the emu. I heard this can fix many problems when you are replacing an older version of this emulator with a newer version. Lots of things are changing in the config file between releases.
  • Display: The sharp_bilinear_simple shader, on by default, creates a sharp pixel image with minimal blurring. It applies a maximum integer pre-scale first. Then it scales only the small remainder using the builtin bilinear filter, keeping the aspect ratio intact. Many Amiga games fit the Vita and Switch screens very nicely. For example, take Chaos Engine with a screen setting of 320*200 and sharp_bilinear_simple shader enabled. The picture can be zoomed using R+Start+Dpad left/right (R+Plus+Dpad left/right on Switch), and moved vertically using R+Start+Dpad up/down (R+Plus+Dpad up/down on Switch) to center it on the screen. Once this is done, the picture fills almost the whole screen and looks amazing with no artifacts or blurriness. The game runs smooth with zero frameskip. Selecting a 'Preset Width' of 320, 352 or 384 (max overscan) results in lo-res screen emulation, good for most games, while 640, 704, or 768 results in hi-res screen emulation, good for use with Workbench or some text-based games.
  • Blitter: The blitter settings can help with graphics glitches in some games. Since it seems to work best, "immediate" is the default. But some games require setting blitter to "normal" and re-booting to remove graphics glitches, for example PP Hammer, Spindizzy Worlds, and Shufflepuck Cafe.
  • WHDLoad: If you have problems with a WHDLoad .hdf game, maybe try an .adf version of the same game. Rock'n Roll is one of a few games that work on UAE4All2 only using .adf files. It has graphics glitches and runs too fast in WHDLoad with .hdf. To make it work correctly, I loaded the "Rock'n Roll.adf" from Gamebase Amiga, chose the preset A500 config, and changed the Blitter setting to Normal.
  • Sprite Collisions: Some games require sprite-to-sprite collisions. Sprite collisions can be turned on in the "more options" menu. The only game I know of that requires this is SpaceTaxi 3.
  • Savestates: Four regular savestates can be saved per game. There's also a slot for an automatic savestate, labeled "auto". If it exists, this will be loaded immediately when the .adf is inserted. To prevent this, delete the auto savestate by selecting it and choosing "delete savestate".
  • Multiplayer: Up to four controllers on Vita TV and Switch are supported and can be fully mapped. The mouse can be switched off because it interferes with the other joystick that controls player 2 in most games. If you pair new controllers on Vita TV and they do not seem to work, scan for them in the "custom controls" menu by pressing L. At the bottom it will say how many controllers have been found. This scanning is not neccessary on Switch. By default, parallel port Amiga joysticks 3 and 4 are controlled by VitaTV/Switch gamepads 3 and 4. They can also be mapped to other inputs using the custom controls screen.
  • Sound: For use with headphones, a stereo separation setting of 50 sounds better than the default setting of 100. The original Amiga had completely disjoint left/right channels. This can sound quite jarring on headphones. Concerning sound frequency, I think 48 kHz gives the best results. On the Switch, 48 kHz is the only supported frequency.

FAQ
=====

  • Kickstart rom files not found on startup?

First, please ensure you are using the correct files. They should be kick13.rom (size: 262,144 bytes), and kick31.rom (size: 524,288). They should be placed in ux0:/data/uae4all/kickstarts on Vita and /switch/uae4all2/kickstarts on Switch. Second, on Vita, please make sure your ux0:/data folder does NOT have the FAT attributes "hidden" or "system" set. Additional supported files are kick12.rom, kick20.rom, and kickcustom.rom (for any user-supplied file, e.g. version 3.1.4).

  • Black screen on Switch, or crash on startup?

In my testing (only with exFAT), I found that exFAT corruption can cause all files in the uae4all2 folder to become corrupted (among others). This includes kick13.rom and other kickstart files, which causes a black screen when leaving the menu. Game .adf files can become corrupted, causing the game to stop booting. Even the executable uae4all2.nro and/or config files in the conf folder can become corrupted quite easily, causing black screen crash on startup. Either don't use exFAT, or make a good backup of the folder and restore it via FTP if there are problems. Once I switched to FAT32, all these problems with file corruption went away.

  • HDF not working?

The maximum hdf file size on Switch is 4 Gb, on Vita it is only 2 Gb. When creating a .hdf file in WinUAE for use with UAE4All2, set surfaces to 1 (size < 1 Gb), 2 (size > 1Gb), or 4 (size > 2 Gb) depending on the size of the file. Set blocksize to 512, sectors to 32 and reserved to 2. Don't use RDB mode. After creating the .hdf it has to be formatted using Workbench. A quick format to FFS filesystem is fine.

Games with known fixes
======

  • Blastar Issue: flickering scrolling Fix: set “Blitter: Normal” and reboot
  • Golden Axe Issue: runs too fast Fix: set “Blitter: Normal” and reboot
  • Lionheart with A1200 config Issue: some flickering graphics glitches in water and in cave, runs slow on Vita Fix: run the floppy version using A500 config
  • Lure of the Temptress (adf only) Issue: hangs at title Fix: use hdf version
  • Mister and Misses (Amiga Power Coverdisk 14b) Issue: flickering and missing floors Fix: set “Blitter: Normal” and reboot
  • PP Hammer Issue: flickering Fix: set “Blitter: Normal” and reboot
  • Rainbow Islands (adf only) Issue: hangs after title Fix: use hdf version
  • Rock’n’Roll Issue: gfx glitches / flickering Fix: set “Blitter: Normal,” use .adf and A500 config, and reboot
  • Shufflepuck Cafe Issue: flickering Fix: set “Blitter: Normal” and reboot.
  • Spacetaxi 3 Issue: taxis move through each other Fix: set “Sprite Collisions: On” then it works perfectly.
  • Spindizzy Worlds Issue: flickering/screen tearing Fix: set “Blitter: Normal” and reboot.
  • Xenon 2 Issue: hangs after title Fix

Release notes

v2.12 · uae4all_2.10.vpk · Mar 23, 2024

Important note to Switch users
======
On the Switch, since v1.84, please use Application mode, not Applet mode, to start uae4all2, otherwise the config save as and savestate export options will not work. You can do this by holding down R while launching any game to make hbmenu appear in Application mode. In other words: launch uae4all2 via game, NOT via Album.

Recent Changes
======
2.12 (Switch only)

  • fix regression causing stuttery audio after suspend by linking with fixed SDL2

2.11 (Switch only)

  • fix touch input on Switch

2.10

  • allow autostarting of config file via command line argument. On Switch, the same forwarder that works with RetroArch can be used. On Vita, a custom bubble builder is provided. It uses the same method as DaedalusX.

Description
=====
Use4All2 Mod is an Amiga emulator for Vita and Switch. This is my mod of this great Amiga emulator that was originally ported to the Vita by Cpasjuste. Depending on when you read this, this mod might be ahead or behind his version.

Screenshot of UAE4All2 running on Switch

Photo of UAE4All2 running on Switch in tabletop mode

More Screenshots:

3 4 5 6 7 8 9 10 11 12 13 14 15 16

Thanks to Cpasjuste for the original port, for jumping in and adding shader support, for making the assembler optimizations work, and for fixing audio playback on suspend/resume in SDL2 for Switch.

Thanks to ScHlAuChi for extensive testing, ideas, and for contributing the new larger virtual keyboard images.

Thanks to wronghands for the new, better-looking menu font, all the new keyboard styles, and many ideas.

Thanks to CrashMidnick for the French virtual keyboard.

Thanks to the original authors Chui, john4p, TomB, notaz, Bernd Schneider, Toni Wilen, Pickle, smoku, AnotherGuest, Anonymous engineer, finkel, Lubomyr, pelya and many more.

Thanks to my Patreon supporters: Jesse Harlin, Mored4u, RadicalR.

Installation
======

  • Vita:
  • Install .vpk
  • Obtain and copy BIOS files kick13.rom (Amiga 500), and kick31.rom (Amiga 1200) to ux0:/data/uae4all/kickstarts.
  • Optional: copy over additional BIOS files kick12.rom, kick20.rom, kickcustom.rom (for e.g. version 3.1.4 or any other user-supplied BIOS) to the same folder.
  • Switch:
  • Download and unzip uae4all2_switch.zip
  • Copy the resulting folder uae4all2 to /switch/ onto your SDCard, ensure none of the "archive" flags is set.
  • You should now have the executable /switch/uae4all2/uae4all2.nro and a folder /switch/uae4all2/data/ with the keyboard icons and other data files on your SDCard.
  • Obtain and copy BIOS files kick13.rom (Amiga 500), and kick31.rom (Amiga 1200) to your SDCard into /switch/uae4all2/kickstarts/.
  • Optional: copy over additional BIOS files kick12.rom, kick20.rom, kickcustom.rom (for e.g. version 3.1.4 or any other user-supplied BIOS) to the same folder.
  • Use nsp injection to start uae4all2, otherwise the config save as and savestate export options will not work. On SX OS, you can do this by holding down R while launching any installed game to make hbmenu appear.
  • MD5 of verified working kickstart rom files, you can test yours at onlinemd5:
kick12.rom (256 kB): (MD5) 85AD74194E87C08904327DE1A9443B7A
kick13.rom (256 kB): (MD5) 82A21C1890CAE844B3DF741F2762D48D
kick20.rom (512 kB): (MD5) FA4ACC75B49E880679FE02716AF24D71
kick31.rom (512 kB): (MD5) 646773759326FBAC3B2311FD8C8793EE

Other files might work, too.

  • You can purchase legal bios roms from Amiga Forever. They work. But since they are encrypted, you have to copy over your .key file along with the roms.

Vita/Switch-exclusive Features
======

  • Full speed emulation of most Amiga games with zero frameskip
  • Large, complete virtual keyboard with adjustable position and adjustable transparency
  • Six fully mappable custom control sets: map Vita/Switch buttons to any Amiga joystick or key input
  • Multiple hard-file support: up to 4 hdf files (size <2GB each on Vita, size <4GB each on Switch) can be mounted simultaneously
  • Multiple controller support on Vita TV/Switch: up to four (eight on Switch) paired controllers can be fully mapped
  • Analog mouse control: control the mouse using the analog stick with adjustable sensitivity
  • Shader support: default "sharp_bilinear_simple" uses integer pre-scale for sharp, undistorted pixels with minimum blur, even if game is zoomed to fill the full screen
  • Custom autofire: any mapped Vita/Switch button can have autofire with adjustable rate
  • Savestate with hard-file support: state can be saved even when hard-files are used
  • Additional emulator settings: sprite-sprite collisions can be enabled, blitter settings can be changed
  • Adjustable stereo separation
  • A button can be mapped to "slow mouse" in custom controls. When custom controls are on and that button is held down, the mouse pointer speed is greatly reduced. This is useful for precisely positioning the cursor.
  • Sticky virtual keyboard modifiers: allows keyboard combos like CTRL-C to be entered easily
  • Touchpad style pointer controls using the touchscreen
  • Parallel port joystick adapter support for multiplayer games with up to 4 joysticks.
  • Additional savestate slot called auto, for automatic savestate loading
  • Physical keyboard and mouse support (Bluetooth on Vita, USB on Switch)
  • Supports loading files from ux0: or uma0: partition (Vita only)
  • Rear touch panel can be enabled for mouse pointer control (Vita only)
  • Split Joy-Con support (Switch only)
  • A "fast mouse" custom button can be mapped to speed up the mouse
  • Automatic full 1080p support in docked mode (Switch only)
  • Savestate import/export to backup savestates
  • Config file management (load, save as, etc.)
  • Thumbnail previews for savestates
  • Four different on-screen keyboard styles: original, warm, cool, and dark
  • On-screen keyboard keys can be pressed via touch input in addition to dpad navigation

Controls
=====

General

(For Switch: Cross = B, Square = Y, Triangle = X, Circle = A, Select = Minus, Start = Plus)

Select = Toggle menu
Start = Toggle virtual keyboard
R+Start+Dpad up/down = Move screen up/down
R+Start+Dpad left/right = Change screenmode (to zoom in on games with borders)
Right analog stick = Analog mouse (can switch this to left stick in menu)

When custom controls are off

Up to four controllers are automatically mapped to players 1-4. Players 3 and 4 are on the emulated parallel port 4 player adapter.

Left analog stick = Amiga joystick directions
Dpad = Amiga joystick directions
L shoulder button = right mouse click (player 1 only)
R shoulder button = left mouse click (player 1 only)
(Shown below are control presets 1 (default) / 2 / 3 / 4)
Square = Autofire (default) / Fire / Autofire / Fire
Cross = Fire (default) / Autofire / Up (Jump) / Up (Jump)
Triangle = Space (default) / Space / Fire / Autofire
Circle = Secondary Fire (used only in a few games)
R+Square = Ctrl
R+Circle = Left Alt
R+Cross = Help
L+Square = Left mouse
L+Circle = Right mouse
R+Dpad = Arrow keys

When custom controls are on

L+Start = Toggle between custom control set number 1, 2, 3, 4 and 5

In this mode, Vita buttons can be mapped to any Amiga side keyboard key or joystick action. There's also a mapping option called "slow mouse." It will slow down the mouse pointer by a factor ten if that mapped button is held down. Up to four controllers can be mapped (for multiplayer on VitaTV and Switch). Four Amiga-side joysticks are supported. Joystick 3 and 4 are on the emulated parallel port joystick adapter.

Virtual keyboard controls

Start = Toggle virtual keyboard
Right analog stick up/down = Move virtual keyboard up and down
Right analog stick left/right = Change virtual keyboard transparency
Cross = Press selected key (on Switch, this can be changed from B to A)
Square = Backspace
Triangle = Toggle shift
Circle = Turn off all sticky keys (ctrl, alt, amiga, and shift) (on Switch, this can be changed from A to B)

Touch controls

Note: for multi-touch gestures, the fingers have to be far enough apart from each other, so that the Vita will not erroneously recognize them as a single finger. Otherwise the pointer will jump around.

Single short tap = left mouse click
Single short tap while holding a second finger down = right mouse click
Single finger drag = move the mouse pointer, how far the pointer moves in response to finger motion depends on the Mouse Speed setting
Dual finger drag = drag'n'drop (left mouse button is held down)
Three finger drag = drag'n'drop (right mouse button is held down)

Switch controls

The default OK button in menu and on-screen keyboard is B. This can be changed to A in "more options."

ZR button = slow-mouse (if custom controls are off)
ZL button = fast-mouse (if custom controls are off)

Split Joycon Mode: Split Joycon mode can be enabled/disabled in "more options." Upto four single Joycons are supported. Buttons can still be remapped. SL for player 1 is hardcoded to bring up the keyboard.

Split Joycon Controls:
Minus/Plus = Menu (player 1 only)
SL = on-screen keyboard (player 1 only)
Pressing stick while moving it = change keyboard transparency/position, control mouse pointer (player 1 only)
SR + SL + Stick directions = hotkey to quick-zoom image and center image vertically (player 1 only)

Physical Keyboard / Mouse controls

On Vita (Bluetooth): Mouse + keyboard tested working with the "Jelly Comb Mini Bluetooth Keyboard With Mouse Touchpad, ASIN:B06Y56BBYP," and with the "Jelly Comb Bluetooth Wireless Mouse ASIN:B075HBDWCF." The Amiga keys are mapped to Windows (GUI) keys as well as Page Up/Down. The Vita doesn't pair with all Bluetooth keyboards and mice. As a rule, if the keyboard works to highlight bubbles with cursor keys, it should also work in UAE4All.

On Switch (USB): All keyboards seem to work. Not all mice seem to work. Mouse compatibility sheet

Custom Bubble / Forwarder
======
To autostart a game config via a custom bubble (Vita) or forwarder (Switch), I used the following steps with the example game Superfrog:

Switch:

  • I started the emulator normally
  • I inserted Superfrog disk 1
  • I saved a config with name "superfrog" using the Config - Save As option in UAE4All2
  • I checked that the config was saved to my SD card with the full name /switch/uae4all2/conf/superfrog.conf
  • I then made myself a forwarder with a Superfrog Icon, using the online forwarder tool that also works for RetroArch, with the following options
  • Core: /switch/uae4all2/uae4all2.nro
  • Rom: /switch/uae4all2/conf/superfrog.conf
  • When I started the forwarder, Superfrog automatically launched.

Vita:

  • I started the emulator normally
  • I inserted Superfrog disk 1
  • I saved a config with name "superfrog" using the Config - Save As option in UAE4All2
  • I checked that the config was saved to my SD card with the full name ux0:/data/uae4all/conf/superfrog.conf
  • I then used the provided build.bat file on Windows (unzip the provided file builder.zip) with the following options
  • Bubble Name: Superfrog
  • Conf Name: ux0:/data/uae4all/conf/superfrog.conf
  • TitleID: SUPERFROG
  • When I started the custom bubble, Superfrog automatically launched

Notes
======

  • Bios: Please put kickstart files in ux0:/data/uae4all/kickstarts on Vita and in /switch/uae4all2/kickstarts directory on Switch. Files must be named as kick13.rom (for Amiga 500), and kick31.rom (for Amiga 1200). Optionally, kick12.rom, kick20.rom, and kickcustom.rom (any user supplied file, e.g. version 3.1.4 or anything else), can also be supplied.
  • Speed: Most games run full speed. Some slow Amiga 1200 and WHDLoad games actually run faster if the CPU speed is reduced from 14 MHz to 7 MHz, because they rely more on custom chips than CPU. Some graphics glitches in Lionheart WHDLoad inside the caves are fixed by this.
  • Config File: If you have problems with settings not saving etc, please delete or rename your config file in the folder ux0:/data/uae4all (Vita) or /switch/uae4all2/conf/ and restart the emu. I heard this can fix many problems when you are replacing an older version of this emulator with a newer version. Lots of things are changing in the config file between releases.
  • Display: The sharp_bilinear_simple shader, on by default, creates a sharp pixel image with minimal blurring. It applies a maximum integer pre-scale first. Then it scales only the small remainder using the builtin bilinear filter, keeping the aspect ratio intact. Many Amiga games fit the Vita and Switch screens very nicely. For example, take Chaos Engine with a screen setting of 320*200 and sharp_bilinear_simple shader enabled. The picture can be zoomed using R+Start+Dpad left/right (R+Plus+Dpad left/right on Switch), and moved vertically using R+Start+Dpad up/down (R+Plus+Dpad up/down on Switch) to center it on the screen. Once this is done, the picture fills almost the whole screen and looks amazing with no artifacts or blurriness. The game runs smooth with zero frameskip. Selecting a 'Preset Width' of 320, 352 or 384 (max overscan) results in lo-res screen emulation, good for most games, while 640, 704, or 768 results in hi-res screen emulation, good for use with Workbench or some text-based games.
  • Blitter: The blitter settings can help with graphics glitches in some games. Since it seems to work best, "immediate" is the default. But some games require setting blitter to "normal" and re-booting to remove graphics glitches, for example PP Hammer, Spindizzy Worlds, and Shufflepuck Cafe.
  • WHDLoad: If you have problems with a WHDLoad .hdf game, maybe try an .adf version of the same game. Rock'n Roll is one of a few games that work on UAE4All2 only using .adf files. It has graphics glitches and runs too fast in WHDLoad with .hdf. To make it work correctly, I loaded the "Rock'n Roll.adf" from Gamebase Amiga, chose the preset A500 config, and changed the Blitter setting to Normal.
  • Sprite Collisions: Some games require sprite-to-sprite collisions. Sprite collisions can be turned on in the "more options" menu. The only game I know of that requires this is SpaceTaxi 3.
  • Savestates: Four regular savestates can be saved per game. There's also a slot for an automatic savestate, labeled "auto". If it exists, this will be loaded immediately when the .adf is inserted. To prevent this, delete the auto savestate by selecting it and choosing "delete savestate".
  • Multiplayer: Up to four controllers on Vita TV and Switch are supported and can be fully mapped. The mouse can be switched off because it interferes with the other joystick that controls player 2 in most games. If you pair new controllers on Vita TV and they do not seem to work, scan for them in the "custom controls" menu by pressing L. At the bottom it will say how many controllers have been found. This scanning is not neccessary on Switch. By default, parallel port Amiga joysticks 3 and 4 are controlled by VitaTV/Switch gamepads 3 and 4. They can also be mapped to other inputs using the custom controls screen.
  • Sound: For use with headphones, a stereo separation setting of 50 sounds better than the default setting of 100. The original Amiga had completely disjoint left/right channels. This can sound quite jarring on headphones. Concerning sound frequency, I think 48 kHz gives the best results. On the Switch, 48 kHz is the only supported frequency.

FAQ
=====

  • Kickstart rom files not found on startup?

First, please ensure you are using the correct files. They should be kick13.rom (size: 262,144 bytes), and kick31.rom (size: 524,288). They should be placed in ux0:/data/uae4all/kickstarts on Vita and /switch/uae4all2/kickstarts on Switch. Second, on Vita, please make sure your ux0:/data folder does NOT have the FAT attributes "hidden" or "system" set. Additional supported files are kick12.rom, kick20.rom, and kickcustom.rom (for any user-supplied file, e.g. version 3.1.4).

  • Black screen on Switch, or crash on startup?

In my testing (only with exFAT), I found that exFAT corruption can cause all files in the uae4all2 folder to become corrupted (among others). This includes kick13.rom and other kickstart files, which causes a black screen when leaving the menu. Game .adf files can become corrupted, causing the game to stop booting. Even the executable uae4all2.nro and/or config files in the conf folder can become corrupted quite easily, causing black screen crash on startup. Either don't use exFAT, or make a good backup of the folder and restore it via FTP if there are problems. Once I switched to FAT32, all these problems with file corruption went away.

  • HDF not working?

The maximum hdf file size on Switch is 4 Gb, on Vita it is only 2 Gb. When creating a .hdf file in WinUAE for use with UAE4All2, set surfaces to 1 (size < 1 Gb), 2 (size > 1Gb), or 4 (size > 2 Gb) depending on the size of the file. Set blocksize to 512, sectors to 32 and reserved to 2. Don't use RDB mode. After creating the .hdf it has to be formatted using Workbench. A quick format to FFS filesystem is fine.

Games with known fixes
======

  • Blastar Issue: flickering scrolling Fix: set “Blitter: Normal” and reboot
  • Golden Axe Issue: runs too fast Fix: set “Blitter: Normal” and reboot
  • Lionheart with A1200 config Issue: some flickering graphics glitches in water and in cave, runs slow on Vita Fix: run the floppy version using A500 config
  • Lure of the Temptress (adf only) Issue: hangs at title Fix: use hdf version
  • Mister and Misses (Amiga Power Coverdisk 14b) Issue: flickering and missing floors Fix: set “Blitter: Normal” and reboot
  • PP Hammer Issue: flickering Fix: set “Blitter: Normal” and reboot
  • Rainbow Islands (adf only) Issue: hangs after title Fix: use hdf version
  • Rock’n’Roll Issue: gfx glitches / flickering Fix: set “Blitter: Normal,” use .adf and A500 config, and reboot
  • Shufflepuck Cafe Issue: flickering Fix: set “Blitter: Normal” and reboot.
  • Spacetaxi 3 Issue: taxis move through each other Fix: set “Sprite Collisions: On” then it works perfectly.
  • Spindizzy Worlds Issue: flickering/screen tearing Fix: set “Blitter: Normal” and reboot.
  • Xenon 2 Issue: hangs after title Fix

Full changelog

Something wrong with this listing? Report a problem · Are you the developer? Claim this listing