← Brewology.com

Vita Store › Games › Spyro Vita

Spyro Vita changelog

v1.2.2 · Nov 17, 2026

What's new in v1.2.2

Fixed

  • The free camera no longer fights the right stick. With the game's passive camera (the default), a held right stick turned the camera at about half speed after a second and a half, and the camera swung back the moment you let go. It now turns at full speed for as long as you hold the stick, and waits about 1.5 s after you let go before it returns behind Spyro. (D162, #154, #156)
  • The safe app finds the shader compiler on set-ups that hide ur0:data from it. On a PS TV, spyro-vita.vpk ran on the slow software renderer although ur0:data/libshacccg.suprx was installed. If that happens to you, copy the file to ux0:data/spyro/libshacccg.suprx as well: the port now loads it from there. (D163, #152, #155)

New

  • CAMERA RECENTRE, in the options menu under CONTROLS. Off: the camera keeps the heading you gave it instead of swinging back behind Spyro as he runs. On is the default, the original's. Flight levels always recentre. (D162)
  • A screen when the shader compiler can't be loaded. The game used to run on the software renderer without a word, several times slower. It now says NO SHADER COMPILER at the start, with what to install and where to copy it; X goes on with the software renderer. (D163)

Thanks to aaerays-boop for the camera report, and to mistial-dev for finding the shader compiler fault and writing its first fix.

Two VPKs. Take spyro-vita.vpk unless you want the Store copy played where the Store installed it:

  • spyro-vita.vpk is the normal, safe app. It plays a disc image, or a Store copy's EBOOT.PBP copied into ux0:data/spyro/.
  • spyro-vita-unsafe.vpk is the same game built as an unsafe app. It needs Enable Unsafe Homebrew switched on in HENkaku's settings, and then finds the Store copy in ux0:pspemu/PSP/GAME/ by itself, with nothing to copy.

They are the same app, so installing one replaces the other; settings and memory-card saves stay. Quick-save states don't carry between the two, because they are separate builds.

Update by installing this VPK over v1.2.1 in VitaShell. Your disc image, settings and memory-card saves in ux0:data/spyro/ stay where they are. Quick-save states from v1.2.1 won't load in v1.2.2, because a state only loads in the build that made it. Save at a fairy before updating.

A native PS Vita port of Spyro the Dragon (1998, PS1; USA SCUS-94228 and Europe SCES-01438), built from the TheMobyCollective/spyro-1 decompilation. It isn't an emulator: the game's own code runs on the Vita's CPU, and its graphics are drawn by the Vita's GPU through vitaGL.

Features

  • The whole game, start to credits
  • 60 fps by default, with the game's logic at 60 Hz in play; the original 30 Hz timing is one option away
  • 16:9 widescreen at the Vita's native 960×544
  • USA and European (PAL) discs, the European one in five languages
  • A disc image, or the PlayStation Store copy's EBOOT.PBP
  • Analog movement (DualShock), and a free camera on the right stick (turn and tilt) with invert X/Y, speed and recentre options
  • Quick save and load (3 state slots), plus the game's own memory card saves
  • Options menu: hold SELECT + START, or tap the middle of the screen. It covers 60 FPS, perspective-correct textures, sub-pixel vertices, resolution, an experimental draw distance, skipping the intro logos, the game's built-in cheats and rear touch L2/R2.

You need your own copy of the game

No game data is included. You need Spyro the Dragon, USA (SCUS-94228) or Europe (SCES-01438), as a disc dump, or the PlayStation Store copy. The Japanese release is a different build and isn't supported yet.

Install

  1. Dump your disc to .bin + .cue (ImgBurn on Windows, cdrdao on Linux/macOS). A .iso won't work, because it loses the music. With the Store copy, use its EBOOT.PBP in place of the dump.
  2. Install spyro-vita.vpk with VitaShell.
  3. Copy your .bin and .cue, or the EBOOT.PBP, into ux0:data/spyro/. No extracting or renaming.
  4. Make sure ur0:data/libshacccg.suprx exists. Run ShaRKBR33D once if it doesn't. If the game still says NO SHADER COMPILER, copy that file to ux0:data/spyro/ as well.
  5. Launch Spyro Vita. The first start checks your game data and compiles shaders.

If something's missing or wrong, the game says so on screen. The full guide is in the README.

Known issues

  • 60 HZ, the default, isn't the PS1's game tick for tick: everything moves at the original's speeds, but the steps in between are new. For the original's timing exactly, choose INTERPOLATED or OFF.
  • 60 fps holds in play in every level measured on hardware; the attract demo's flight scenes can still slip below it.
  • The Store copy loads more slowly than a disc image, because each block is decompressed on the Vita.
  • 2× draw distance is experimental and drops frames in big open levels.
  • The first time you pick the perspective or sub-pixel setting, the menu pauses for a few seconds while its shaders compile.
  • Opening the pause or inventory screen has a brief hitch.

Credits and licences

  • TheMobyCollective: the Spyro 1 decompilation (CC0)
  • OpenDriver2 / REDRIVER2: PsyCross (MIT)
  • Rinnegatamante: vitaGL (LGPL-3.0)
  • kokke: tiny-AES-c (Unlicense)
  • SDL2 (zlib) and VitaSDK
  • mistial-dev: the Store copy support, v1.2.1's fixes and the shader compiler report

The port's own code is MIT. The LiveArea art is excluded from that licence: the Spyro the Dragon logo (an Activision trademark), and a background by Simon Kopp (Airborn Studios). See THIRD_PARTY_NOTICES.md.

Spyro the Dragon is a trademark of Activision. This project isn't affiliated with or endorsed by Sony Interactive Entertainment, Insomniac Games, Activision or Universal.

SHA-256 (spyro-vita.vpk): 7ec7a79e82e65c84cf9b32a8b270b30c5cfd2d6c54ede9cc865d43a623d12064
SHA-256 (spyro-vita-unsafe.vpk): da1807459756e70a0a4042aead76ecd9e6837edf55a6e655500401ea1f0d42a1

v1.2.1 · Nov 14, 2026

What's new in v1.2.1

Fixed

  • The Peace Keepers cannon no longer crashes the game. Riding the cannon and getting off could close the game with error C2-12828-1. (#147)
  • Spyro no longer hops on his own or runs fast at 60 HZ. In Cliff Town and on other slopes, charging uphill with jump held could make Spyro keep jumping, a third faster than the original, with the sounds to match. His state changes now happen once a game tick, as in the original. Hits, the pause after a hit before he can jump again, and the supercharge jump keep the original's timing too. (D160, #148, #149)

New

  • The PlayStation Store copy works. If you bought Spyro the Dragon as a PS1 Classic, copy its EBOOT.PBP from ux0:pspemu/PSP/GAME/NPUI94228/ (Americas) or NPEE00076/ (Europe) into ux0:data/spyro/, with no disc image beside it, and the port plays the game from that file. Nothing is converted. Both hold the USA disc. Loading is slower than from a disc image, and the first start takes about a minute longer. (D157–D159, #132, #146)

Thanks to mistial-dev, who wrote all three changes.

Update by installing this VPK over v1.2.0 in VitaShell. Your disc image, settings and memory-card saves in ux0:data/spyro/ stay where they are. Quick-save states from v1.2.0 won't load in v1.2.1, because a state only loads in the build that made it. Save at a fairy before updating.

A native PS Vita port of Spyro the Dragon (1998, PS1; USA SCUS-94228 and Europe SCES-01438), built from the TheMobyCollective/spyro-1 decompilation. It isn't an emulator: the game's own code runs on the Vita's CPU, and its graphics are drawn by the Vita's GPU through vitaGL.

Features

  • The whole game, start to credits
  • 60 fps by default, with the game's logic at 60 Hz in play; the original 30 Hz timing is one option away
  • 16:9 widescreen at the Vita's native 960×544
  • USA and European (PAL) discs, the European one in five languages
  • A disc image, or the PlayStation Store copy's EBOOT.PBP
  • Analog movement (DualShock), and a free camera on the right stick (turn and tilt) with invert X/Y and speed options
  • Quick save and load (3 state slots), plus the game's own memory card saves
  • Options menu: hold SELECT + START, or tap the middle of the screen. It covers 60 FPS, perspective-correct textures, sub-pixel vertices, resolution, an experimental draw distance, skipping the intro logos, the game's built-in cheats and rear touch L2/R2.

You need your own copy of the game

No game data is included. You need Spyro the Dragon, USA (SCUS-94228) or Europe (SCES-01438), as a disc dump, or the PlayStation Store copy. The Japanese release is a different build and isn't supported yet.

Install

  1. Dump your disc to .bin + .cue (ImgBurn on Windows, cdrdao on Linux/macOS). A .iso won't work, because it loses the music. With the Store copy, use its EBOOT.PBP in place of the dump.
  2. Install spyro-vita.vpk with VitaShell.
  3. Copy your .bin and .cue, or the EBOOT.PBP, into ux0:data/spyro/. No extracting or renaming.
  4. Make sure ur0:data/libshacccg.suprx exists. Run ShaRKBR33D once if it doesn't.
  5. Launch Spyro Vita. The first start checks your game data and compiles shaders.

If something's missing or wrong, the game says so on screen. The full guide is in the README.

Known issues

  • 60 HZ, the default, isn't the PS1's game tick for tick: everything moves at the original's speeds, but the steps in between are new. For the original's timing exactly, choose INTERPOLATED or OFF.
  • 60 fps holds in play in every level measured on hardware; the attract demo's flight scenes can still slip below it.
  • The Store copy loads more slowly than a disc image, because each block is decompressed on the Vita.
  • 2× draw distance is experimental and drops frames in big open levels.
  • The first time you pick the perspective or sub-pixel setting, the menu pauses for a few seconds while its shaders compile.
  • Opening the pause or inventory screen has a brief hitch.

Credits and licences

  • TheMobyCollective: the Spyro 1 decompilation (CC0)
  • OpenDriver2 / REDRIVER2: PsyCross (MIT)
  • Rinnegatamante: vitaGL (LGPL-3.0)
  • kokke: tiny-AES-c (Unlicense)
  • SDL2 (zlib) and VitaSDK
  • mistial-dev: the Store copy support and this release's fixes

The port's own code is MIT. The LiveArea art is excluded from that licence: the Spyro the Dragon logo (an Activision trademark), and a background by Simon Kopp (Airborn Studios). See THIRD_PARTY_NOTICES.md.

Spyro the Dragon is a trademark of Activision. This project isn't affiliated with or endorsed by Sony Interactive Entertainment, Insomniac Games, Activision or Universal.

SHA-256 (spyro-vita.vpk): 31d947fd2d68e794504b2031e6b28211646e1fd417e5f2f7eaf09e19928cbe60

v1.2.0 · Nov 13, 2026

What's new in v1.2.0

New

  • European (PAL) discs work. Spyro the Dragon, Europe, SCES-01438 now runs alongside the USA release. Pick English, French, German, Spanish or Italian on the title screen, as on a PS1. The European disc runs at the USA release's speed and 60 Hz, not at the 50 Hz of a PAL PlayStation, with its own text, voices, cutscenes and taller picture. Its saves are kept apart, in ux0:data/spyro/save/pal/. (D131–D156)
  • 60 fps is the default, and the game itself runs at 60. The new 60 HZ mode runs the game's logic at 60 Hz in play, in every level, so every picture is the game's own. v1.1.0 drew extra pictures in between a 30 Hz game, and had it off by default. (D130, D141–D144, D150)
  • One 60 FPS row: OFF, INTERPOLATED or 60 HZ. INTERPOLATED keeps the game at its original 30 Hz and adds in-between pictures, for the PS1's timing tick for tick. OFF is the original 30 fps. Switching into or out of 60 HZ needs a restart, and the menu asks. (D136, D148, D150)
  • The free camera turns at 60 Hz in the 60 HZ mode. (D142)

Changed

  • TEX FILTER and DYNAMIC RES are gone from the options menu. A value either row saved earlier no longer applies: both are off. (D153)
  • A 60 FPS setting of OFF saved by v1.1.0 becomes 60 HZ the first time v1.2.0 starts. OFF was the old default, so the port can't tell a choice from a default. Set the row to OFF again if that's what you want; INTERPOLATED carries over. (D150)
  • The in-between pictures are drawn a new way, by a second copy of the game's draw code, in every part of the game: the title, menus, cutscenes and attract demos as well as play. (D125–D129)
  • More of the port is its own code. The PlayStation library code the port used to borrow from PsyCross is replaced by the port's own, and the game's memory is laid out natively. (D100, D106, D113–D118)

Update by installing this VPK over v1.1.0 in VitaShell. Your disc image, settings and memory-card saves in ux0:data/spyro/ stay where they are. Quick-save states from v1.1.0 won't load in v1.2.0, because a state only loads in the build that made it. Save at a fairy before updating.

A native PS Vita port of Spyro the Dragon (1998, PS1; USA SCUS-94228 and Europe SCES-01438), built from the TheMobyCollective/spyro-1 decompilation. It isn't an emulator: the game's own code runs on the Vita's CPU, and its graphics are drawn by the Vita's GPU through vitaGL.

Features

  • The whole game, start to credits
  • 60 fps by default, with the game's logic at 60 Hz in play; the original 30 Hz timing is one option away
  • 16:9 widescreen at the Vita's native 960×544
  • USA and European (PAL) discs, the European one in five languages
  • Analog movement (DualShock), and a free camera on the right stick (turn and tilt) with invert X/Y and speed options
  • Quick save and load (3 state slots), plus the game's own memory card saves
  • Options menu: hold SELECT + START, or tap the middle of the screen. It covers 60 FPS, perspective-correct textures, sub-pixel vertices, resolution, an experimental draw distance, skipping the intro logos, the game's built-in cheats and rear touch L2/R2.

You need your own disc

No game data is included. You need Spyro the Dragon, USA (SCUS-94228) or Europe (SCES-01438). The Japanese disc is a different build and isn't supported yet.

Install

  1. Dump your disc to .bin + .cue (ImgBurn on Windows, cdrdao on Linux/macOS). A .iso won't work, because it loses the music.
  2. Install spyro-vita.vpk with VitaShell.
  3. Copy your .bin and .cue into ux0:data/spyro/. No extracting or renaming.
  4. Make sure ur0:data/libshacccg.suprx exists. Run ShaRKBR33D once if it doesn't.
  5. Launch Spyro Vita. The first start checks your disc and compiles shaders.

If something's missing or wrong, the game says so on screen. The full guide is in the README.

Known issues

  • 60 HZ, the default, isn't the PS1's game tick for tick: everything moves at the original's speeds, but the steps in between are new. For the original's timing exactly, choose INTERPOLATED or OFF.
  • 60 fps holds in play in every level measured on hardware; the attract demo's flight scenes can still slip below it.
  • 2× draw distance is experimental and drops frames in big open levels.
  • The first time you pick the perspective or sub-pixel setting, the menu pauses for a few seconds while its shaders compile.
  • Opening the pause or inventory screen has a brief hitch.

Credits and licences

  • TheMobyCollective: the Spyro 1 decompilation (CC0)
  • OpenDriver2 / REDRIVER2: PsyCross (MIT)
  • Rinnegatamante: vitaGL (LGPL-3.0)
  • SDL2 (zlib) and VitaSDK

The port's own code is MIT. The LiveArea art is excluded from that licence: the Spyro the Dragon logo (an Activision trademark), and a background by Simon Kopp (Airborn Studios). See THIRD_PARTY_NOTICES.md.

Spyro the Dragon is a trademark of Activision. This project isn't affiliated with or endorsed by Sony Interactive Entertainment, Insomniac Games, Activision or Universal.

SHA-256 (spyro-vita.vpk): 748657aee165b7d3a184cbe90df0f779ad4a51089d815f324ab108d9d17bc8ea

v1.1.0 · Nov 4, 2026

What's new in v1.1.0

Fixed

  • The game froze about 18 minutes into a session, wherever you were. The Vita's vblank counter is 16 bits wide and wraps after 65,536 frames, and the frame pacing didn't handle the wrap. It does now. (D90)
  • Widescreen fills the whole screen. v1.0.x left black bars at the top and bottom. (D67)
  • SUB-PIXEL VERTICES works again. It had stopped doing anything, so characters wobbled at 60 fps, most visibly in the opening cutscene. (D89)

Faster

  • 60 fps holds in play. With 60 FPS turned on in the options menu, the game now stays at 60 fps in play in every level measured on hardware, and no longer drops back to 30. It's still off by default and labelled experimental, because the attract demo's flight scenes can still slip below 60. (D63–D81)
  • Much more of the game runs as native code. The renderers' maths, the drawing, the audio mixer and the disc reads now run as native Vita code instead of emulated PS1 hardware, and most of the remaining translated game code is now hand-written C. The game draws the same pictures, makes the same sound and writes the same memory card as before, all checked frame by frame and byte by byte against the original. (D80–D95)
  • New audio mixer. It uses about 70% less CPU, and its output no longer runs short in play: on hardware it ran dry only at start-up and level loads, 11 times on the test route against the old mixer's 78. Level loads no longer spend about 57 ms decoding each sound bank. (D84, D88)
  • Slightly faster loading. Disc reads go straight to the file, and the game thread waits about 9% less for them. (D93)
  • Lighter GPU work. Draws are joined, there are fewer full-screen passes, and textures are decoded on the CPU. Toasty's heaviest views cost two to three times less GPU time. (D69, D74, D79)

Changed

  • RESOLUTION offers NATIVE and PS1 only. The 2×–4× supersampling modes were too slow to be useful. An old res=2–4 line in config.txt falls back to native. (D85)
  • New DYNAMIC RES option, off by default. It lowers the render resolution when the GPU can't keep up. (D75)
  • If the game ever freezes, it now writes a crash dump (ux0:data/psp2core-*.psp2dmp) and notes in spyro.log where it was. Include both in a bug report. (D73)

Update by installing this VPK over v1.0.1 in VitaShell. Your disc image, settings and memory-card saves in ux0:data/spyro/ stay where they are. Quick-save states from v1.0.1 won't load in v1.1.0, because a state only loads in the build that made it. Save at a fairy before updating.

A native PS Vita port of Spyro the Dragon (1998, PS1, USA SCUS-94228), built from the TheMobyCollective/spyro-1 decompilation. It isn't an emulator: the game's own code runs on the Vita's CPU, and its graphics are drawn by the Vita's GPU through vitaGL.

Features

  • The whole game, start to credits, with the original 30 Hz game logic
  • 16:9 widescreen at the Vita's native 960×544
  • Optional 60 fps (experimental), with in-between frames drawn from the 30 Hz game
  • Analog movement (DualShock), and a free camera on the right stick (turn and tilt) with invert X/Y and speed options
  • Quick save and load (3 state slots), plus the game's own memory card saves
  • Options menu: hold SELECT + START, or tap the middle of the screen. It covers texture filtering, perspective-correct textures, sub-pixel vertices, resolution, dynamic resolution, an experimental draw distance, skipping the intro logos, the game's built-in cheats and rear touch L2/R2.

You need your own disc

No game data is included. You need Spyro the Dragon, USA, SCUS-94228. PAL and Japanese discs are different builds and won't run.

Install

  1. Dump your disc to .bin + .cue (ImgBurn on Windows, cdrdao on Linux/macOS). A .iso won't work, because it loses the music.
  2. Install spyro-vita.vpk with VitaShell.
  3. Copy your .bin and .cue into ux0:data/spyro/. No extracting or renaming.
  4. Make sure ur0:data/libshacccg.suprx exists. Run ShaRKBR33D once if it doesn't.
  5. Launch Spyro Vita. The first start checks your disc and compiles shaders.

If something's missing or wrong, the game says so on screen. The full guide is in the README.

Known issues

  • 60 fps is still experimental and off by default. It holds in play, but the attract demo's flight scenes can slip below it.
  • 2× draw distance is experimental and can drop frames in open areas.
  • The first time you pick a texture filter, perspective or sub-pixel setting, the menu pauses for a few seconds while its shaders compile.
  • Opening the pause or inventory screen has a brief hitch.

Credits and licences

  • TheMobyCollective: the Spyro 1 decompilation (CC0)
  • OpenDriver2 / REDRIVER2: PsyCross (MIT)
  • Rinnegatamante: vitaGL (LGPL-3.0)
  • SDL2 (zlib) and VitaSDK

The port's own code is MIT. The LiveArea art is excluded from that licence: the Spyro the Dragon logo (an Activision trademark), and a background by Simon Kopp (Airborn Studios). See THIRD_PARTY_NOTICES.md.

Spyro the Dragon is a trademark of Activision. This project isn't affiliated with or endorsed by Sony Interactive Entertainment, Insomniac Games, Activision or Universal.

SHA-256 (spyro-vita.vpk): 0a6c8b3e175420e2775be11695cfc63b87b25620b196205e1541c693931efc2d

v1.0.1 · Nov 1, 2026

What's new in v1.0.1

  • Fixed: saving at a fairy said "NO SAVE FILE" and didn't save when widescreen was on (the default), or with 60 fps or a longer draw distance. 4:3 wasn't affected. Your memory card file is kept as it is: saves made with v1.0 load, and new saves work. (D61)

Update by installing this VPK over v1.0 in VitaShell. Your disc image, settings and saves in ux0:data/spyro/ stay where they are. Quick-save states from v1.0 won't load in v1.0.1, because states only load in the build that made them. Save at a fairy before updating.

A native PS Vita port of Spyro the Dragon (1998, PS1, USA SCUS-94228), built from the TheMobyCollective/spyro-1 decompilation. It isn't an emulator: the game's own code runs on the Vita's CPU, and its graphics are drawn by the Vita's GPU through vitaGL.

Features

  • The whole game, start to credits, with the original 30 Hz game logic
  • 16:9 widescreen at the Vita's native 960×544
  • Analog movement (DualShock), and a free camera on the right stick (turn and tilt) with invert X/Y and speed options
  • Quick save and load (3 state slots), plus the game's own memory card saves
  • Options menu: hold SELECT + START, or tap the middle of the screen. It covers texture filtering, perspective-correct textures, sub-pixel vertices, resolution, an experimental draw distance, skipping the intro logos, the game's built-in cheats and rear touch L2/R2.

You need your own disc

No game data is included. You need Spyro the Dragon, USA, SCUS-94228. PAL and Japanese discs are different builds and won't run.

Install

  1. Dump your disc to .bin + .cue (ImgBurn on Windows, cdrdao on Linux/macOS). A .iso won't work, because it loses the music.
  2. Install spyro-vita.vpk with VitaShell.
  3. Copy your .bin and .cue into ux0:data/spyro/. No extracting or renaming.
  4. Make sure ur0:data/libshacccg.suprx exists. Run ShaRKBR33D once if it doesn't.
  5. Launch Spyro Vita. The first start checks your disc and compiles shaders.

If something's missing or wrong, the game says so on screen. The full guide is in the README.

Known issues

  • 60 fps is experimental and off by default; the CPU can't hold it in busy scenes.
  • 2× draw distance is experimental and can drop frames in open areas.
  • Turning on texture filtering the first time pauses a few seconds while shaders compile.
  • Opening the pause menu has a brief hitch.

Credits and licences

  • TheMobyCollective: the Spyro 1 decompilation (CC0)
  • OpenDriver2 / REDRIVER2: PsyCross (MIT)
  • Rinnegatamante: vitaGL (LGPL-3.0)
  • SDL2 (zlib) and VitaSDK

The port's own code is MIT. The LiveArea art is excluded from that licence: the Spyro the Dragon logo (an Activision trademark), and a background by Simon Kopp (Airborn Studios). See THIRD_PARTY_NOTICES.md.

Spyro the Dragon is a trademark of Activision. This project isn't affiliated with or endorsed by Sony Interactive Entertainment, Insomniac Games, Activision or Universal.

SHA-256 (spyro-vita.vpk): bfb7ec333efacf64bc9ce21dcd63e09f642d997d4dbea1e842538471096d583f

v1.0 · Oct 31, 2026

A native PS Vita port of Spyro the Dragon (1998, PS1, USA SCUS-94228), built from the TheMobyCollective/spyro-1 decompilation. It isn't an emulator: the game's own code runs on the Vita's CPU, and its graphics are drawn by the Vita's GPU through vitaGL.

Features

  • The whole game, start to credits, with the original 30 Hz game logic
  • 16:9 widescreen at the Vita's native 960×544
  • Analog movement (DualShock), and a free camera on the right stick (turn and tilt) with invert X/Y and speed options
  • Quick save and load (3 state slots), plus the game's own memory card saves
  • Options menu: hold SELECT + START, or tap the middle of the screen. It covers texture filtering, perspective-correct textures, sub-pixel vertices, resolution, an experimental draw distance, skipping the intro logos, the game's built-in cheats and rear touch L2/R2.

You need your own disc

No game data is included. You need Spyro the Dragon, USA, SCUS-94228. PAL and Japanese discs are different builds and won't run.

Install

  1. Dump your disc to .bin + .cue (ImgBurn on Windows, cdrdao on Linux/macOS). A .iso won't work, because it loses the music.
  2. Install spyro-vita.vpk with VitaShell.
  3. Copy your .bin and .cue into ux0:data/spyro/. No extracting or renaming.
  4. Make sure ur0:data/libshacccg.suprx exists. Run ShaRKBR33D once if it doesn't.
  5. Launch Spyro Vita. The first start checks your disc and compiles shaders.

If something's missing or wrong, the game says so on screen. The full guide is in the README.

Known issues

  • 60 fps is experimental and off by default; the CPU can't hold it in busy scenes.
  • 2× draw distance is experimental and can drop frames in open areas.
  • Turning on texture filtering the first time pauses a few seconds while shaders compile.
  • Opening the pause menu has a brief hitch.

Credits and licences

  • TheMobyCollective: the Spyro 1 decompilation (CC0)
  • OpenDriver2 / REDRIVER2: PsyCross (MIT)
  • Rinnegatamante: vitaGL (LGPL-3.0)
  • SDL2 (zlib) and VitaSDK

The port's own code is MIT. The LiveArea art is excluded from that licence: the Spyro the Dragon logo (an Activision trademark), and a background by Simon Kopp (Airborn Studios). See THIRD_PARTY_NOTICES.md.

Spyro the Dragon is a trademark of Activision. This project isn't affiliated with or endorsed by Sony Interactive Entertainment, Insomniac Games, Activision or Universal.

SHA-256 (spyro-vita.vpk): 9c1c63b8e7923fe5dbad817314af30c2798bdd0f6ec0044736bbf28a35115152