Other consolesLoginRegisterDevelopers

PS5 Store › Tools › Telemetry overlay

Telemetry overlay changelog

v1.0.19 · Oct 18, 2026

🎮 PS5 In-Game Overlay v1.0.19

Standalone in-game hardware telemetry overlay for jailbroken PlayStation 5 with real-time hardware monitoring and built-in Web configuration panel.

✨ Features

  • 12 Live Hardware Metrics:
  • FPS: Hardware Display Controller Engine scanout flip counter (/dev/dce)
  • CPU: Zen 2 Tctl core temperature (°C)
  • LOAD: CPU utilization (%)
  • CCLK: Zen 2 CPU core frequencies in MHz
  • GPU: AMD RDNA 2 SoC GPU temperature (°C)
  • GCLK: RDNA 2 GFXCLK clock in MHz
  • RAM: System memory usage (GB)
  • VRAM: Video memory usage (GB)
  • SSD: M.2 NVMe SSD expansion drive temperature (°C via SoC channel 2)
  • FAN: Blower fan duty cycle (%)
  • PWR: SoC APU power consumption in Watts
  • IP: PlayStation 5 local IPv4 address
  • Web Configuration Panel (Port 8585):
  • Full remote control via browser at http://<PS5_IP>:8585
  • Live preview, reorder metrics, custom colors (HEX/Picker), position & offset adjustments
  • Graceful overlay unloader to quit without restarting console
  • Persistent Config: Automatically saved to /data/overlay/config.ini

🚀 Quick Start

Send the ELF binary to your jailbroken PS5 via port 9020 or 9021:

nc -q0 <PS5_IP> 9021 < ps5-overlay-kus_v1.0.19.elf

Full Changelog: https://github.com/smoxa/ps5-new-overlay/compare/v0.0.18...v1.0.19

v0.0.18 · Oct 17, 2026

🎮 PS5 In-Game Overlay v1.0.18 — Full Telemetry & Web Control

Автономный внутриигровой оверлей мониторинга производительности и системной телеметрии в реальном времени для PlayStation 5 (Jailbreak) с управлением через веб-интерфейс.

🚀 Главные нововведения версии v1.0.18

  • 💾 Мониторинг температуры M.2 NVMe SSD (SSD XX°C):
  • Добавлено считывание температуры накопителя через прямой аппаратный сенсор SoC (канал 2 sceKernelGetSocSensorTemperature).
  • Если дополнительный M.2 диск не установлен или слот не используется, автоматически выводится статус N/A.
  • ⚡ Исправлено считывание частот и мощности (CCLK, GCLK, PWR):
  • Системные функции sceKernelGetSocClock, sceKernelGetSocPowerConsumption, sceKernelGetCpuCoreClock и sceKernelGetCpuFrequency теперь предварительно разрешаются загрузчиком с root-привилегиями и передаются в payload через структуру bootstrap.
  • Добавлена эскалация capabilities (ucred) для целевого процесса SceShellUI.
  • 🎯 Аппаратный счётчик FPS (/dev/dce):
  • Считывание реального фреймрейта напрямую через аппаратный контроллер дисплея PS5 без просадок и сбоев.
  • 🌐 Встроенная Web-панель настроек (порт 8585):
  • Настройка оверлея прямо с телефона или ПК по адресу http://<IP_ВАШЕЙ_PS5>:8585.
  • Индивидуальное включение/выключение каждой из 12 метрик.
  • Сортировка порядка отображения кнопками вверх/вниз (▲ / ▼).
  • Выбор цвета каждой метрики через цветовую палитру (Color Picker / HEX).
  • Настройка положения полосы (Сверху / Снизу, Слева / Центр / Справа, отступы X/Y).
  • Настройка размера шрифта, высоты полосы, цвета и прозрачности фона.
  • 🛑 Горячая выгрузка (Unload):
  • Возможность корректно завершить работу оверлея и освободить память прямо из веб-интерфейса без необходимости перезагружать консоль.
  • 💾 Постоянное сохранение настроек:
  • Конфигурация сохраняется в файл /data/overlay/config.ini и автоматически подгружается при каждом старте.

📊 Доступные метрики телеметрии (12 показателей):

  1. FPS — текущая частота кадров в секунду (Framerate).
  2. CPU — температура процессора AMD Zen 2 (Tctl).
  3. LOAD — общая загрузка процессора в процентах (CPU %).
  4. CCLK — рабочая частота ядер процессора (Zen 2 CPU Clock в МГц).
  5. GPU — температура видеочипа (SoC / GPU).
  6. GCLK — тактовая частота видеоядра (RDNA 2 GFXCLK в МГц).
  7. RAM — использование системной памяти (ОЗУ).
  8. VRAM — использование видеопамяти графического чипа.
  9. SSD — температура накопителя в слоте M.2 NVMe.
  10. FAN — скорость вращения кулера консоли в процентах.
  11. PWR — энергопотребление кристалла SoC APU в Ваттах.
  12. IP — локальный сетевой IPv4-адрес PlayStation 5.

📥 Установка и запуск

  1. Запустите эксплойт на вашей PS5 (с поддержкой ELF-загрузчика на порту 9021 или 9020).
  2. Отправьте файл ps5-overlay-kus_v1.0.18.elf на консоль:
   nc -q0 <IP_PS5> 9021 < ps5-overlay-kus_v1.0.18.elf
  1. После появления уведомления "PS5 Overlay Loaded successfully!" откройте в браузере страницу настроек:
   http://<IP_PS5>:8585

v1.0.15 · Sep 21, 2026

🎮 PS5 Hardware Overlay v1.0.15

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in v1.0.15

  • 🧹 Streamlined Architecture (Pure In-Game Overlay):
  • Completely removed embedded HTTP web server, sockets, and heavy HTML template assets.
  • Minimal footprint, zero background network listening, and maximum stability.
  • ⚡ Real-Time In-Game FPS Counter:
  • Hardware scanout flip delta sampling via Display Controller Engine (/dev/dce, ioctl 0x80308217).
  • Native fallback support for OnionHEN seqlock sampler (/system_tmp/fps_sample).
  • Dedicated FPS badge in gold/yellow (#FFEB3B) with live framerate (60 / 120 / --).
  • Configurable via show_fps = true in /data/ps5_overlay/config.ini.
  • 🖥️ Native On-Screen In-Game HUD:
  • Automatically injected into SceShellUI via ptrace (with kstuff active).
  • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
  • Sleek translucent 2D bar at top of screen with color-coded metrics:
  • FPS (Gold/Yellow #FFEB3B)
  • CPU (Green #66FF66)
  • GPU (Purple #B366FF)
  • RAM (Orange #FFB34D)
  • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
  • Recurring notification popups completely disabled to protect your gameplay immersion.
  • Only a single silent startup toast confirms the overlay is loaded.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
   nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  1. A single notification appears confirming the overlay is active.
  2. Launch any game — the hardware HUD bar appears at the top of the screen!

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: https://github.com/smoxa/ps5-new-overlay/compare/v1.0.14...v1.0.15

v1.0.14 · Sep 20, 2026

🎮 PS5 Hardware Overlay v1.0.14

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in v1.0.14

  • ⚡ Real-Time In-Game FPS Counter:
  • Hardware scanout flip delta sampling via Display Controller Engine (/dev/dce, ioctl 0x80308217).
  • Native fallback support for OnionHEN seqlock sampler (/system_tmp/fps_sample).
  • Dedicated FPS badge in gold/yellow (#FFEB3B) with live framerate (60 / 120 / --).
  • Dedicated Frame Rate card on Web HUD dashboard and live floating /bar.
  • Configurable via show_fps = true in /data/ps5_overlay/config.ini.
  • 🖥️ Native On-Screen In-Game HUD:
  • Automatically injected into SceShellUI via ptrace (with kstuff active).
  • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
  • Sleek translucent 2D bar at top of screen with color-coded metrics:
  • FPS (Gold/Yellow #FFEB3B)
  • CPU (Green #66FF66)
  • GPU (Purple #B366FF)
  • RAM (Orange #FFB34D)
  • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
  • Recurring notification popups completely disabled to protect your gameplay immersion.
  • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
  • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
  • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
   nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  1. A single notification appears confirming the overlay is active.
  2. Launch any game — the hardware HUD bar appears at the top of the screen!
  3. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: https://github.com/smoxa/ps5-new-overlay/compare/v1.0.13...v1.0.14

v1.0.13 · Sep 20, 2026

🎮 PS5 Hardware Overlay v1.0.13

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in This Release

  • 🖥️ Native On-Screen In-Game HUD:
  • Automatically injected into SceShellUI via ptrace (with kstuff active).
  • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
  • Sleek translucent 2D bar at top of screen with color-coded metrics:
  • CPU (Green #66FF66)
  • GPU (Purple #B366FF)
  • RAM (Orange #FFB34D)
  • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
  • Recurring notification popups completely disabled to protect your gameplay immersion.
  • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
  • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
  • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
   nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  1. A single notification appears confirming the overlay is active.
  2. Launch any game — the hardware HUD bar appears at the top of the screen!
  3. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: https://github.com/smoxa/ps5-new-overlay/compare/v1.0.12...v1.0.13

v1.0.12 · Sep 20, 2026

🎮 PS5 Hardware Overlay v1.0.12

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in This Release

  • 🖥️ Native On-Screen In-Game HUD:
  • Automatically injected into SceShellUI via ptrace (with kstuff active).
  • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
  • Sleek translucent 2D bar at top of screen with color-coded metrics:
  • CPU (Green #66FF66)
  • GPU (Purple #B366FF)
  • RAM (Orange #FFB34D)
  • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
  • Recurring notification popups completely disabled to protect your gameplay immersion.
  • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
  • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
  • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
   nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  1. A single notification appears confirming the overlay is active.
  2. Launch any game — the hardware HUD bar appears at the top of the screen!
  3. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: https://github.com/smoxa/ps5-new-overlay/compare/v1.0.11...v1.0.12

v1.0.11 · Sep 20, 2026

🎮 PS5 Hardware Overlay v1.0.11

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in This Release

  • 🖥️ Native On-Screen In-Game HUD:
  • Automatically injected into SceShellUI via ptrace (with kstuff active).
  • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
  • Sleek translucent 2D bar at top of screen with color-coded metrics:
  • CPU (Green #66FF66)
  • GPU (Purple #B366FF)
  • RAM (Orange #FFB34D)
  • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
  • Recurring notification popups completely disabled to protect your gameplay immersion.
  • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
  • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
  • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
   nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  1. A single notification appears confirming the overlay is active.
  2. Launch any game — the hardware HUD bar appears at the top of the screen!
  3. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: https://github.com/smoxa/ps5-new-overlay/compare/v1.0.10...v1.0.11

v1.0.10 · Sep 20, 2026

🎮 PS5 Hardware Overlay v1.0.10

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in This Release

  • 🖥️ Native On-Screen In-Game HUD:
  • Automatically injected into SceShellUI via ptrace (with kstuff active).
  • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
  • Sleek translucent 2D bar at top of screen with color-coded metrics:
  • CPU (Green #66FF66)
  • GPU (Purple #B366FF)
  • RAM (Orange #FFB34D)
  • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
  • Recurring notification popups completely disabled to protect your gameplay immersion.
  • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
  • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
  • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
   nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  1. A single notification appears confirming the overlay is active.
  2. Launch any game — the hardware HUD bar appears at the top of the screen!
  3. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: https://github.com/smoxa/ps5-new-overlay/compare/v1.0.9...v1.0.10

v1.0.9 · Sep 20, 2026

🎮 PS5 Hardware Overlay v1.0.9

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in This Release

  • 🖥️ Native On-Screen In-Game HUD:
  • Automatically injected into SceShellUI via ptrace (with kstuff active).
  • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
  • Sleek translucent 2D bar at top of screen with color-coded metrics:
  • CPU (Green #66FF66)
  • GPU (Purple #B366FF)
  • RAM (Orange #FFB34D)
  • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
  • Recurring notification popups completely disabled to protect your gameplay immersion.
  • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
  • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
  • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
   nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  1. A single notification appears confirming the overlay is active.
  2. Launch any game — the hardware HUD bar appears at the top of the screen!
  3. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: https://github.com/smoxa/ps5-new-overlay/compare/v1.0.8...v1.0.9

v1.0.8 · Sep 20, 2026

🎮 PS5 Hardware Overlay v1.0.8

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in This Release

  • 🖥️ Native On-Screen In-Game HUD:
  • Automatically injected into SceShellUI via ptrace (with kstuff active).
  • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
  • Sleek translucent 2D bar at top of screen with color-coded metrics:
  • CPU (Green #66FF66)
  • GPU (Purple #B366FF)
  • RAM (Orange #FFB34D)
  • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
  • Recurring notification popups completely disabled to protect your gameplay immersion.
  • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
  • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
  • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
   nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  1. A single notification appears confirming the overlay is active.
  2. Launch any game — the hardware HUD bar appears at the top of the screen!
  3. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: https://github.com/smoxa/ps5-new-overlay/compare/v1.0.7...v1.0.8

v1.0.6 · Sep 20, 2026

🎮 PS5 Hardware Overlay v1.0.6

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in This Release

  • 🖥️ Native On-Screen In-Game HUD:
  • Automatically injected into SceShellUI via ptrace (with kstuff active).
  • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
  • Sleek translucent 2D bar at top of screen with color-coded metrics:
  • CPU (Green #66FF66)
  • GPU (Purple #B366FF)
  • RAM (Orange #FFB34D)
  • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
  • Recurring notification popups completely disabled to protect your gameplay immersion.
  • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
  • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
  • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
   nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  1. A single notification appears confirming the overlay is active.
  2. Launch any game — the hardware HUD bar appears at the top of the screen!
  3. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: https://github.com/smoxa/ps5-new-overlay/compare/v1.0.5...v1.0.6

v1.0.4 · Sep 20, 2026

🎮 PS5 Hardware Overlay v1.0.4

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in This Release

  • 🖥️ Native On-Screen In-Game HUD:
  • Automatically injected into SceShellUI via ptrace (with kstuff active).
  • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
  • Sleek translucent 2D bar at top of screen with color-coded metrics:
  • CPU (Green #66FF66)
  • GPU (Purple #B366FF)
  • RAM (Orange #FFB34D)
  • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
  • Recurring notification popups completely disabled to protect your gameplay immersion.
  • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
  • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
  • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
   nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  1. A single notification appears confirming the overlay is active.
  2. Launch any game — the hardware HUD bar appears at the top of the screen!
  3. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: https://github.com/smoxa/ps5-new-overlay/compare/v1.0.3...v1.0.4

v1.0.3 · Sep 20, 2026

🎮 PS5 Hardware Overlay v1.0.3

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in This Release

  • 🖥️ Native On-Screen In-Game HUD:
  • Automatically injected into SceShellUI via ptrace (with kstuff active).
  • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
  • Sleek translucent 2D bar at top of screen with color-coded metrics:
  • CPU (Green #66FF66)
  • GPU (Purple #B366FF)
  • RAM (Orange #FFB34D)
  • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
  • Recurring notification popups completely disabled to protect your gameplay immersion.
  • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
  • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
  • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
   nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  1. A single notification appears confirming the overlay is active.
  2. Launch any game — the hardware HUD bar appears at the top of the screen!
  3. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: https://github.com/smoxa/ps5-new-overlay/compare/v1.0.2...v1.0.3

v1.0.2 · Sep 20, 2026

🎮 PS5 Hardware Overlay v1.0.2

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+, kstuff active).

✨ What's New in This Release

  • 🖥️ Native On-Screen In-Game HUD:
  • Automatically injected into SceShellUI via ptrace (with kstuff active).
  • Rendered directly on top of gameplay via Mono PUI (Scene.RootWidget).
  • Sleek translucent 2D bar at top of screen with color-coded metrics:
  • CPU (Green #66FF66)
  • GPU (Purple #B366FF)
  • RAM (Orange #FFB34D)
  • FAN (Cyan #33E0FF)
  • 🔕 Zero Toast Spam:
  • Recurring notification popups completely disabled to protect your gameplay immersion.
  • Only a single silent startup toast confirms the overlay is loaded.
  • 🌐 Real-Time Web HUD (Port 8080):
  • Full dashboard at http://<ps5-ip>:8080/ for phone / PC viewing.
  • In-game floating bar route at http://<ps5-ip>:8080/overlay or /bar.

🚀 Quick Start

  1. Ensure kstuff is active on your PS5.
  2. Send ps5_overlay.elf to your console via port 9020 or 9021:
   nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf
  1. A single notification appears confirming the overlay is active.
  2. Launch any game — the hardware HUD bar appears at the top of the screen!
  3. (Optional) Open http://<ps5_ip>:8080/ in a browser to monitor remotely.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: https://github.com/smoxa/ps5-new-overlay/compare/v1.0.1...v1.0.2

v1.0.1 · Sep 20, 2026

🎮 PS5 Hardware Overlay v1.0.1

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5 (FW 1.xx - 10.xx+).

✨ Features

  • Native In-Game Toast OSD: Automatic dual-line HUD toasts updating smoothly over games (OverwriteLatest).
  • Real-Time Web HUD (Port 8080): Dark-mode PlayStation dashboard viewable on phone, PC, or PS5 "Pin to Side" browser.
  • CPU Temperature & CPU Load (Zen 2 8-core tracks)
  • GPU / SoC Temperature & VRAM Usage
  • System RAM Usage (Used / Total GB and %)
  • Cooling Fan Speed (Duty Cycle %)
  • Zero extra bloat (no cheats, FTP, or risk of kernel panics)

🚀 Quick Start

  1. Send ps5_overlay.elf to your console via port 9020 or 9021 (e.g. nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf).
  2. The overlay starts displaying dual-line toasts every 4s in the corner of your TV screen.
  3. Open http://<ps5_ip>:8080/ on your phone or PC (or pin to side in the PS5 browser) for the real-time HUD dashboard.
  4. (Optional) Customize settings in /data/ps5_overlay/config.ini.

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: https://github.com/smoxa/ps5-new-overlay/compare/v1.0.0...v1.0.1

v1.0.0 · Sep 20, 2026

🎮 PS5 Hardware Overlay v1.0.0

Lightweight, standalone in-game hardware monitoring overlay for jailbroken PlayStation 5.

✨ Features

  • CPU Temperature & CPU Load (Average & Per-Core)
  • GPU / APU SOC Temperature & VRAM Usage
  • System RAM Usage (Used / Total MB and %)
  • Cooling Fan Speed (Duty Cycle %)
  • Persistent on-screen HUD bar (top/bottom)
  • Zero extra bloat (no cheats, FTP, or heavy HEN payloads)

🚀 Quick Start

  1. Send ps5_overlay.elf to your console via port 9020 or 9021 (e.g. nc -w 3 <ps5_ip> 9020 < ps5_overlay.elf).
  2. Alternatively, place ps5_overlay.elf in /data/OnionHEN/payloads/ or /data/etaHEN/payloads/ for automatic startup.
  3. (Optional) Customize settings in /data/ps5_overlay/config.ini (see config.ini.example).

🔒 SHA-256 Checksums

Included in SHA256SUMS.txt.

Full Changelog: https://github.com/smoxa/ps5-new-overlay/commits/v1.0.0